Herunterladen Inhalt Inhalt
Teilen
Diese Seite drucken
Asus P5GD1 Bedienungsanleitung
  1. Anleitungen
  2. Marken
  3. Asus Anleitungen
  4. Mainboards
  5. P5GD1
  6. Bedienungsanleitung
Asus P5GD1 Bedienungsanleitung

Asus P5GD1 Bedienungsanleitung

Vorschau ausblenden
Inhaltsverzeichnis

Werbung

Quicklinks

P5GD1

Werbung

Inhaltsverzeichnis
loading

Verwandte Anleitungen für Asus P5GD1

Inhaltszusammenfassung für Asus P5GD1

  • Seite 1 P5GD1...
  • Seite 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Seite 3: Inhaltsverzeichnis

    Contents ..................... iii Notices ....................vii Safety information ................viii About this guide ................. ix Typography ..................x P5GD1 specifications summary ............xi Chapter 1: Product introduction Chapter 1: Product introduction Chapter 1: Product introduction Chapter 1: Product introduction Chapter 1: Product introduction Welcome! ................
  • Seite 4 Creating a bootable floppy disk ......4-1 4.1.2 ASUS EZ Flash utility ..........4-2 4.1.3 AFUDOS utility ............4-3 4.1.4 ASUS CrashFree BIOS 2 utility ........ 4-5 4.1.5 ASUS Update utility ..........4-7 BIOS setup program ............4-10 4.2.1 BIOS menu screen ..........4-11 4.2.2...
  • Seite 5 5.2.2 Drivers menu ............5-2 5.2.3 Utilities menu ............5-3 5.2.4 Manuals menu ............5-5 5.2.5 ASUS Contact information ........5-6 5.2.6 Other information ........... 5-6 Software information ............5-8 5.3.1 ASUS MyLogo™ ............5-8 v v v v v...
  • Seite 6 Contents 5.3.2 AI NET 2 ............... 5-10 Using the Virtual Cable Tester™ ......5-10 5.3.3 Audio configurations ..........5-11 RAID configurations ............5-16 5.4.1 Installing hard disks ..........5-17 5.4.2 Intel ® RAID configurations ........5-18 5.4.3 ® 8212F RAID configurations ......5-22 Creating a RAID driver disk ..........

  • Seite 7: Notices

    Notices Federal Communications Commission Statement Federal Communications Commission Statement Federal Communications Commission Statement Federal Communications Commission Statement Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and •...

  • Seite 8: Safety Information

    Safety information Electrical safety Electrical safety Electrical safety Electrical safety Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.

  • Seite 9: About This Guide

    A S U S w e b s i t e s A S U S w e b s i t e s The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.

  • Seite 10: Conventions Used In This Guide

    Conventions used in this guide Conventions used in this guide Conventions used in this guide Conventions used in this guide Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. D A N G E R / W A R N I N G : D A N G E R / W A R N I N G : D A N G E R / W A R N I N G :...

  • Seite 11: P5Gd1 Specifications Summary

    O v e r c l o c k i n g O v e r c l o c k i n g ASUS AI NOS (Non-delay Overclocking System) feature ASUS AI Overclocking (Intelligent CPU frequency tuner) ASUS C.P.R. (CPU Parameter Recall)
  • Seite 12 P5GD1 specifications summary B I O S f e a t u r e s B I O S f e a t u r e s B I O S f e a t u r e s B I O S f e a t u r e s B I O S f e a t u r e s 4 MB Flash ROM, AMI BIOS, PnP, DMI2.0, SM BIOS 2.3,...
  • Seite 13 This chapter describes the motherboard features and the new technologies it supports. Product introduction...

  • Seite 14: Chapter Summary

    Chapter summary Welcome! ................1-1 Package contents ..............1-1 Special features ..............1-2 A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1...

  • Seite 15: Welcome

    P 5 G D 1 m o t h e r b o a r d ! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.

  • Seite 16: Special Features

    Special features 1.3.1 1.3.1 Product highlights Product highlights 1.3.1 1.3.1 1.3.1 Product highlights Product highlights Product highlights Latest processor technology Latest processor technology Latest processor technology Latest processor technology Latest processor technology The motherboard comes with a 775-pin surface mount Land Grid Array (LGA) socket designed for the Intel ®...
  • Seite 17 Dual RAID solution Dual RAID solution Dual RAID solution Dual RAID solution Dual RAID solution Onboard RAID controllers provide the motherboard with dual-RAID functionality that allows you to select the best RAID solution using IDE or Serial ATA devices. The Intel ®...

  • Seite 18: Asus Proactive Features

    ASUS Q-Fan technology ASUS Q-Fan technology ASUS Q-Fan technology ASUS Q-Fan technology The ASUS Q-Fan technology smartly adjusts the CPU fan speed according to the system loading to ensure quiet, cool, and efficient operation. See page 4-33 for details. ASUS Multi-language BIOS...

  • Seite 19: Hardware Information

    This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. Hardware information...
  • Seite 20 Chapter summary Before you proceed .............. 2-1 Motherboard overview ............2-2 Central Processing Unit (CPU) ..........2-6 System memory ..............2-11 Expansion slots ..............2-15 Jumpers ................2-18 Connectors ................. 2-21 A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1...

  • Seite 21: Before You Proceed

    The illustration below shows the location of the onboard LED. SB_PWR P5GD1 Standby Powered P5GD1 Onboard LED Power A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1 2 - 1...

  • Seite 22: Motherboard Overview

    P5GD1 2 - 2...

  • Seite 23: Motherboard Layout

    Back surround L/R Center: Side surround L/R Below: Bass Top:Line In Center:Line Out PWR_FAN Below:Mic In CPU_FAN PCIEX1_1 Marvell 88E8053 PCIEX16 PCI1 P5GD1 Intel ICH6R PCI2 COM2 PCI3 ALC861 SATA2 SATA4 SPDIF_OUT CR2032 3V Lithium Cell SATA1 SATA3 CMOS Power...

  • Seite 24: Layout Contents

    2.2.4 2.2.4 2.2.4 2.2.4 2.2.4 Layout Contents Layout Contents Layout Contents Layout Contents Layout Contents S l o t s S l o t s P a g e P a g e S l o t s S l o t s S l o t s P a g e P a g e...
  • Seite 25 I n t e r n a l c o n n e c t o r s I n t e r n a l c o n n e c t o r s I n t e r n a l c o n n e c t o r s I n t e r n a l c o n n e c t o r s I n t e r n a l c o n n e c t o r s P a g e...

  • Seite 26: Central Processing Unit (Cpu)

    Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket pins/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related. •...
  • Seite 27 Press the load lever with your thumb (A) and move it to the left (B) until it is released from the retention tab. P n P C a p P n P C a p P n P C a p P n P C a p P n P C a p R e t e n t i o n t a b...
  • Seite 28 Close the load plate (A), then push the load lever (B) until it snaps into the retention tab. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! Notes on Intel Notes on Intel...

  • Seite 29: Installling The Cpu Heatsink And Fan

    2.3.2 2.3.2 2.3.2 Installling the CPU heatsink and fan Installling the CPU heatsink and fan Installling the CPU heatsink and fan 2.3.2 2.3.2 Installling the CPU heatsink and fan Installling the CPU heatsink and fan The Intel ® Pentium ® 4 LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance.
  • Seite 30 CPU_FAN CPU FAN PWR CPU FAN IN CPU FAN PWM P5GD1 Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. 2 - 1 0 2 - 1 0...

  • Seite 31: System Memory

    Overview Overview The motherboard comes with four 184-pin Double Data Rate (DDR) Dual Inline Memory Modules (DIMM) sockets. The following figure illustrates the location of the sockets: P5GD1 P5GD1 184-Pin DDR DIMM Sockets 2.4.2 2.4.2 2.4.2 Memory Configurations Memory Configurations Memory Configurations 2.4.2...
  • Seite 32 Recommended memory configurations Recommended memory configurations Recommended memory configurations Recommended memory configurations Recommended memory configurations S o c k e t s S o c k e t s S o c k e t s S o c k e t s S o c k e t s M o d e M o d e...
  • Seite 33 DDR400 Qualified Vendors List DDR400 Qualified Vendors List DDR400 Qualified Vendors List DDR400 Qualified Vendors List DDR400 Qualified Vendors List D I M M s u p p o r t D I M M s u p p o r t D I M M s u p p o r t D I M M s u p p o r t D I M M s u p p o r t...

  • Seite 34: Installing A Dimm

    2.4.3 2.4.3 2.4.3 Installing a DIMM Installing a DIMM Installing a DIMM 2.4.3 2.4.3 Installing a DIMM Installing a DIMM Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components.

  • Seite 35: Expansion Slots

    Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.

  • Seite 36: Interrupt Assignments

    2.5.3 2.5.3 2.5.3 2.5.3 2.5.3 Interrupt assignments Interrupt assignments Interrupt assignments Interrupt assignments Interrupt assignments Standard interrupt assignments Standard interrupt assignments Standard interrupt assignments Standard interrupt assignments Standard interrupt assignments I R Q I R Q I R Q I R Q I R Q P r i o r i t y P r i o r i t y...

  • Seite 37: Pci Slots

    2.5.4 2.5.4 PCI slots PCI slots 2.5.4 2.5.4 2.5.4 PCI slots PCI slots PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. The figure shows a LAN card installed on a PCI slot.

  • Seite 38: Jumpers

    CLRTC P5GD1 Normal Clear CMOS P5GD1 Clear RTC RAM (Default) You do not need to clear the RTC when the system hangs due to overclocking. For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values.
  • Seite 39 +5VSB (Default) USBPW56 USBPW78 P5GD1 +5VSB P5GD1 USB device wake-up (Default) • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up.
  • Seite 40 KBPWR +5VSB (Default) P5GD1 P5GD1 Keyboard power setting 2 - 2 0 2 - 2 0 2 - 2 0 C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n...

  • Seite 41: Connectors

    Connectors 2.7.1 2.7.1 Rear panel connectors Rear panel connectors 2.7.1 2.7.1 2.7.1 Rear panel connectors Rear panel connectors Rear panel connectors 1 . 1 . P S / 2 m o u s e p o r t ( g r e e n ) . P S / 2 m o u s e p o r t ( g r e e n ) .
  • Seite 42 Refer to the audio configuration table for the function of the audio ports in 2, 4, 6, or 8-channel configuration. Audio 2, 4, 6, or 8-channel configuration Audio 2, 4, 6, or 8-channel configuration Audio 2, 4, 6, or 8-channel configuration Audio 2, 4, 6, or 8-channel configuration Audio 2, 4, 6, or 8-channel configuration P o r t...

  • Seite 43: Internal Connectors

    P5GD1 PIN 1 P5GD1 Floppy disk drive connector 2 . 2 . P r i m a r y I D E c o n n e c t o r ( 4 0 - 1 p i n P R I _ I D E )
  • Seite 44 PIN 1. P5GD1 PRI_RAID PIN 1 P5GD1 RAID IDE connectors • Before creating a RAID set using Ultra ATA hard disks, make sure that you have connected the Ultra ATA signal cable and installed Ultra ATA 133/100/66 hard disk drives.
  • Seite 45 RSATA_RXP1 RSATA_RXP3 P5GD1 SATA connectors I m p o r t a n t n o t e s o n S e r i a l A T A I m p o r t a n t n o t e s o n S e r i a l A T A...
  • Seite 46 +12V P5GD1 Rotation CHA_FAN +12V P5GD1 Fan connectors Rotation 2 - 2 6 2 - 2 6 2 - 2 6 C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n...
  • Seite 47 PIN 1 P5GD1 P5GD1 Serial port connectors 7 . 7 . U S B c o n n e c t o r s ( 1 0 - 1 p i n U S B 5 6 , U S B 7 8 )
  • Seite 48 +5 Volts PSON# Ground Ground +3 Volts -12 Volts P5GD1 ATX power connectors +3 Volts +3 Volts 2 - 2 8 2 - 2 8 2 - 2 8 C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n...
  • Seite 49 P5GD1 P5GD1 CD audio connector 1 0 . 1 0 . G A M E / M I D I p o r t c o n n e c t o r ( 1 6 - 1 p i n G A M E ) 1 0 .
  • Seite 50 Azalia-compliant Legacy AC’97-compliant pin definition pin definition P5GD1 P5GD1 Analog front panel connector Connect a high-definiton front panel audio module to this connector to avail the high-definition audio features of the motherboard. 2 - 3 0 2 - 3 0...
  • Seite 51 P5GD1 RESET IDE_LED PWRSW P5GD1 System Panel Connector The sytem panel connector is color-coded for easy connection. Refer to the connector description below for details. • S y s t e m p o w e r L E D ( G r e e n 3 - p i n P L E D )
  • Seite 52 2 - 3 2 2 - 3 2 2 - 3 2 C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n 2 - 3 2...
  • Seite 53 This chapter describes the power up sequence, the vocal POST messages, and ways of shutting down the system. Powering up...

  • Seite 54: Chapter Summary

    Chapter summary Starting up for the first time ..........3-1 Powering off the computer ..........3-2 A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1...

  • Seite 55: Starting Up For The First Time

    Starting up for the first time After making all the connections, replace the system case cover. Be sure that all switches are off. Connect the power cord to the power connector at the back of the system chassis. Connect the power cord to a power outlet that is equipped with a surge protector.

  • Seite 56: Powering Off The Computer

    Powering off the computer 3.2.1 3.2.1 Using the OS shut down function Using the OS shut down function 3.2.1 3.2.1 3.2.1 Using the OS shut down function Using the OS shut down function Using the OS shut down function If you are using Windows ®...

  • Seite 57: Bios-Setup

    This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. BIOS setup...
  • Seite 58 Chapter summary Managing and updating your BIOS ........4-1 BIOS setup program ............4-10 Main menu ................4-13 Advanced menu ..............4-18 Power menu ................ 4-30 Boot menu ................4-35 Exit menu ................4-39 A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1...

  • Seite 59: Managing And Updating Your Bios

    Refer to the corresponding sections for details on these utilities. Save a copy of the original motherboard BIOS file to a bootable floppy disk in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update or AFUDOS utilities. 4.1.1 4.1.1 4.1.1...

  • Seite 60: Asus Ez Flash Utility

    ASUS EZ Flash utility ASUS EZ Flash utility The ASUS EZ Flash feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS-based utility. The EZ Flash utility is built-in the BIOS chip so it is accessible by pressing <Alt>...

  • Seite 61: Afudos Utility

    4.1.3 4.1.3 4.1.3 AFUDOS utility AFUDOS utility AFUDOS utility 4.1.3 4.1.3 AFUDOS utility AFUDOS utility The AFUDOS utility allows you to update the BIOS file in DOS environment using a bootable floppy disk with the updated BIOS file. This utility also allows you to copy the current BIOS file that you can use as backup when the BIOS fails or gets corrupted during the updating process.

  • Seite 62: Boot The System In Dos Mode, Then At The Prompt Type

    Updating the BIOS file To update the BIOS file using the AFUDOS utility: Visit the ASUS website (www.asus.com) and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable floppy disk. Write the BIOS filename on a piece of paper. You need to type the exact BIOS filename at the DOS prompt.

  • Seite 63: Asus Crashfree Bios 2 Utility

    ASUS CrashFree BIOS 2 utility ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support CD or the floppy disk that contains the updated BIOS file.
  • Seite 64 Restart the system after the utility completes the updating process. The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the ASUS website (www.asus.com) to download the latest BIOS file. 4 - 6...

  • Seite 65: Asus Update Utility

    ASUS Update utility 4.1.5 4.1.5 ASUS Update utility ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows ® environment. The ASUS Update utility allows you to: • Save the current BIOS file •...
  • Seite 66 Updating the BIOS through the Internet Updating the BIOS through the Internet Updating the BIOS through the Internet To update the BIOS through the Internet: Launch the ASUS Update utility from the Windows ® desktop by clicking S t a r t...
  • Seite 67 A S U S U p d a t e A S U S U p d a t e. The ASUS Update main window appears. U p d a t e B I O S f r o m a...

  • Seite 68: Bios Setup Program

    The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard and . 4 - 1 0 4 - 1 0...

  • Seite 69: Bios Menu Screen

    Language [English] Use [+] or [-] to Primary IDE Master :[ST320413A] configure system time. Primary IDE Slave :[ASUS CD-S340] Secondary IDE Master :[Not Detected] Secondary IDE Slave :[Not Detected] Third IDE Master :[Not Detected] Fourth IDE Master...

  • Seite 70: Menu Items

    For example, selecting M a i n M a i n M a i n M a i n shows the M a i n Primary IDE Slave :[ASUS CD-S340] Secondary IDE Master :[Not Detected] Secondary IDE Slave :[Not Detected] Third IDE Master :[Not Detected] Main menu items.

  • Seite 71: Main Menu

    Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. Refer to section “4.2.1 BIOS menu screen” for information on the menu screen items and how to navigate through them. System Time [11:51:19] System Date...

  • Seite 72: Primary, Third And Fourth Ide Master/Slave

    4.3.5 4.3.5 4.3.5 Primary, Third and Fourth IDE Master/Slave Primary, Third and Fourth IDE Master/Slave Primary, Third and Fourth IDE Master/Slave 4.3.5 4.3.5 Primary, Third and Fourth IDE Master/Slave Primary, Third and Fourth IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices.

  • Seite 73: Ide Configuration

    PIO Mode [Auto] PIO Mode [Auto] PIO Mode [Auto] PIO Mode [Auto] PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] DMA Mode [Auto] DMA Mode [Auto] DMA Mode [Auto] DMA Mode [Auto] Selects the DMA mode.
  • Seite 74 Onboard IDE Operate Mode [Enhanced Mode] Onboard IDE Operate Mode [Enhanced Mode] Onboard IDE Operate Mode [Enhanced Mode] Onboard IDE Operate Mode [Enhanced Mode] Onboard IDE Operate Mode [Enhanced Mode] Allows selection of the IDE operation mode depending on the operating system (OS) that you installed.

  • Seite 75: System Information

    IDE Detect Time Out [35] IDE Detect Time Out [35] IDE Detect Time Out [35] IDE Detect Time Out [35] IDE Detect Time Out [35] Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] 4.3.7 4.3.7 4.3.7...

  • Seite 76: Advanced Menu

    A I N O S A I N O S A I N O S - the ASUS AI Non-delay Overclocking System feature intelligently A I N O S A I N O S determines the system load and automatically boost the performance for the most demanding tasks.
  • Seite 77 Performance Mode [Auto] Performance Mode [Auto] Performance Mode [Auto] Performance Mode [Auto] Performance Mode [Auto] Allows enhanced system performance. Setting to [Turbo] may cause the system to become unstable. If this happens, revert to the default setting [Auto]. Configuration options: [Auto] [Standard] [Turbo] The following item appears only when the AI Overclocking item is set to [Overclock Profile].
  • Seite 78 The following item appears only when the AI Overclocking item is set to [AI N.O.S.] or [Manual]. Memory Voltage [Auto] Memory Voltage [Auto] Memory Voltage [Auto] Memory Voltage [Auto] Memory Voltage [Auto] Allows selection of the DDR SDRAM operating voltage. Set to Auto for safe mode.

  • Seite 79: Lan Cable Status

    DRAM Frequency [Auto] DRAM Frequency [Auto] DRAM Frequency [Auto] DRAM Frequency [Auto] DRAM Frequency [Auto] Allows you to set the DDR operating frequency. Configuration options: [Auto] [400 MHz] [533 MHz] [600 MHz] Selecting a DRAM frequency that is not supported by your DIMM module may cause the system to become unstable! If this happens, revert to the default setting.

  • Seite 80: Usb Configuration

    4.4.3 4.4.3 4.4.3 USB Configuration USB Configuration USB Configuration 4.4.3 4.4.3 USB Configuration USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press <Enter> to display the configuration options. USB Configuration Module Version - 2.23.2-9.4 USB Devices Enabled: None USB Function...

  • Seite 81: Cpu Configuration

    4.4.4 4.4.4 4.4.4 4.4.4 4.4.4 CPU Configuration CPU Configuration CPU Configuration CPU Configuration CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. Configure Advanced CPU settings Sets the ratio between CPU Core Clock and the Manufacturer: Intel FSB Frequency.

  • Seite 82: Chipset

    CPU Internal Thermal Control [Auto] CPU Internal Thermal Control [Auto] CPU Internal Thermal Control [Auto] CPU Internal Thermal Control [Auto] CPU Internal Thermal Control [Auto] Disables or sets the CPU internal thermal control. Configuration options: [Disabled] [Auto] Hyper-Threading Technology [Enabled] Hyper-Threading Technology [Enabled] Hyper-Threading Technology [Enabled] Hyper-Threading Technology [Enabled]...
  • Seite 83 DRAM RAS# to CAS# Delay [4 Clocks] Controls the latency between the DDR SDRAM active command and the read/write command. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks] DRAM RAS# Activate to Precharge [15 Clocks] Sets the RAS Activate timing to Precharge timing. Configuration options: [1 Clock] [2 Clocks] ~ [15 Clocks] DRAM Write Recovery Time [4 Clocks] Sets the DRAM Write Recover Time.

  • Seite 84: Onboard Devices Configuration

    4.4.6 4.4.6 4.4.6 Onboard Devices Configuration Onboard Devices Configuration Onboard Devices Configuration 4.4.6 4.4.6 Onboard Devices Configuration Onboard Devices Configuration Configure Win627EHF Super IO Chipset Enable or Disable High Definition Audio HD Audio Controller [Enabled] Controller Onboard LAN [Enabled] LAN Option ROM [Disabled] ITE8212F Controller [IDE Mode]...
  • Seite 85 Serial Port2 Address [2F8/IRQ3] Serial Port2 Address [2F8/IRQ3] Serial Port2 Address [2F8/IRQ3] Serial Port2 Address [2F8/IRQ3] Serial Port2 Address [2F8/IRQ3] Allows you to select the Serial Port2 base address. Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] Parallel Port Address [378] Parallel Port Address [378] Parallel Port Address [378] Parallel Port Address [378] Parallel Port Address [378]...

  • Seite 86: Pci Pnp

    4.4.7 4.4.7 4.4.7 PCI PnP PCI PnP PCI PnP 4.4.7 4.4.7 PCI PnP PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices.
  • Seite 87 PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled] PCI IDE BusMaster [Enabled] Allows BIOS to use PCI bus mastering when reading/writing to IDE devices. Configuration options: [Disabled] [Enabled] OffBoard PCI/ISA IDE Card [Auto] OffBoard PCI/ISA IDE Card [Auto] OffBoard PCI/ISA IDE Card [Auto] OffBoard PCI/ISA IDE Card [Auto]...

  • Seite 88: Power Menu

    Power menu The Power menu items allow you to change the settings for the Advanced Configuration and Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then press <Enter> to display the configuration options. Configure CPU. Suspend Mode [Auto] Repost Video on S3 Resume [No]...

  • Seite 89: Apm Configuration

    4.5.5 4.5.5 4.5.5 APM Configuration APM Configuration APM Configuration 4.5.5 4.5.5 APM Configuration APM Configuration APM Configuration Enabled or disable APM. Power Button Mode [On/Off] Restore on AC Power Loss [Power Off] Power On By RTC Alarm [Disabled] Power On By External Modems [Disabled] Power On By PCI/PCIEX Devices [Disabled]...
  • Seite 90 Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled] When set to [Enabled], this parameter allows you to turn on the system through a PCI LAN or modem card.

  • Seite 91: Hardware Monitor

    CPU Q-Fan Control [Disabled] CPU Q-Fan Control [Disabled] CPU Q-Fan Control [Disabled] Allows you to enable or disable the ASUS Q-Fan feature that smartly adjusts the fan speeds for more efficient system operation. Configuration options: [Disabled] [Enabled] C P U Q - F a n M o d e...
  • Seite 92 CPU Fan Ratio [Auto] CPU Fan Ratio [Auto] CPU Fan Ratio [Auto] CPU Fan Ratio [Auto] CPU Fan Ratio [Auto] Allows you to select the appropriate CPU fan speed ratio for the system. The default [Auto] automatically selects the fan speed ratio when operating a low CPU temperature.

  • Seite 93: Boot Menu

    [1st FLOPPY DRIVE] 2nd Boot Device [PM-ST330620A] 3rd Boot Device [PS-ASUS CD-S360] 1st ~ xxth Boot Device [1st Floppy Drive] 1st ~ xxth Boot Device [1st Floppy Drive] 1st ~ xxth Boot Device [1st Floppy Drive] 1st ~ xxth Boot Device [1st Floppy Drive]...

  • Seite 94: Boot Settings Configuration

    This allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled] Set this item to [Enabled] to use the ASUS MyLogo2™ feature. Add On ROM Display Mode [Force BIOS] Add On ROM Display Mode [Force BIOS]...

  • Seite 95: Security

    Interrupt 19 Capture [Disabled] Interrupt 19 Capture [Disabled] Interrupt 19 Capture [Disabled] Interrupt 19 Capture [Disabled] Interrupt 19 Capture [Disabled] When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled] 4.6.3 4.6.3 Security Security 4.6.3...

  • Seite 96: Change User Password

    After you have set a supervisor password, the other items appear to allow you to change other security settings. Security Settings Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password User Access Level [Full Access] Change User Password Clear User Password Password Check [Setup]...

  • Seite 97: Exit Menu

    Password Check [Setup] Password Check [Setup] Password Check [Setup] Password Check [Setup] Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. Configuration options: [Setup] [Always] Boot Sector Virus Protection [Disabled] Boot Sector Virus Protection [Disabled]...

  • Seite 98: Discard Changes

    If you attempt to exit the Setup program without saving your changes, the program prompts you with a message asking if you want to save your changes before exiting. Press <Enter> to save the changes while exiting. Exit & Discard Changes Exit &...

  • Seite 99: Software Support

    This chapter describes the contents of the support CD that comes with the motherboard package. Software support...
  • Seite 100 Chapter summary Installing an operating system ..........5-1 Support CD information ............5-1 Software information ............5-8 RAID configurations ............5-16 Creating a RAID driver disk ..........5-28 A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1...

  • Seite 101: Installing An Operating System

    The support CD that came with the motherboard package contains the drivers, software applications, and utilities that you can install to avail all motherboard features. The contents of the support CD are subject to change at any time without notice. Visit the ASUS website(www.asus.com) for updates. 5.2.1 5.2.1 5.2.1...

  • Seite 102: Drivers Menu

    5.2.2 5.2.2 5.2.2 Drivers menu Drivers menu Drivers menu 5.2.2 5.2.2 Drivers menu Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. QFE Update QFE Update QFE Update QFE Update QFE Update...

  • Seite 103: Utilities Menu

    Marvell Yukon Gigabit Ethernet Driver Marvell Yukon Gigabit Ethernet Driver Marvell Yukon Gigabit Ethernet Driver Marvell Yukon Gigabit Ethernet Driver Marvell Yukon Gigabit Ethernet Driver Installs the Marvell ® Yukon 88E8053 PCI Express™ Gigabit LAN driver that provides up to 1000 Mbps data transfer rates. IT8212 Driver and Application IT8212 Driver and Application IT8212 Driver and Application...

  • Seite 104: Asus Update

    ASUS Update ASUS Update ASUS Update ASUS Update The ASUS Update utility allows you to update the motherboard BIOS in a Windows ® environment. This utility requires an Internet connection either through a network or an Internet Service Provider (ISP). See page 4-7 for details.

  • Seite 105: Manuals Menu

    5.2.4 5.2.4 5.2.4 5.2.4 5.2.4 Manuals menu Manuals menu Manuals menu Manuals menu Manuals menu The Manuals menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. ® ® Install the Adobe Acrobat Reader from the Utilities menu before opening the manual files.

  • Seite 106: Asus Contact Information

    C o n t a c t C o n t a c t C o n t a c t tab to display the ASUS contact information. You can C o n t a c t also find this information on the inside front cover of this user guide.
  • Seite 107 Displays the support CD contents in graphical format. Technical support Form Technical support Form Technical support Form Technical support Form Technical support Form Displays the ASUS Technical Support Request Form that you have to fill out when requesting technical support. Filelist Filelist Filelist Filelist...

  • Seite 108: Software Information

    ASUS MyLogo™ ASUS MyLogo™ ASUS MyLogo™ The ASUS MyLogo™ utility lets you customize the boot logo. The boot logo is the image that appears on screen during the Power-On-Self-Tests (POST). The ASUS MyLogo™ is automatically installed when you install the...
  • Seite 109 R a t i o R a t i o box. When the screen returns to the ASUS Update utility, flash the original BIOS to load the new boot logo. 10. After flashing the BIOS, restart the computer to display the new boot logo during POST.

  • Seite 110: Ai Net 2

    5.3.2 5.3.2 AI NET 2 AI NET 2 5.3.2 5.3.2 5.3.2 AI NET 2 AI NET 2 AI NET 2 The Marvell ® Virtual Cable Tester™ (VCT) is a cable diagnostic utility that reports LAN cable faults and shorts using the Time Domain Reflectometry (TDR) technology.

  • Seite 111: Audio Configurations

    5.3.3 5.3.3 5.3.3 5.3.3 5.3.3 Audio configurations Audio configurations Audio configurations Audio configurations Audio configurations The Realtek ® ALC861 High Definition Audio CODEC provides 8-channel audio capability to deliver the ultimate audio experience on your PC. The software provides Jack-Sensing function, S/PDIF out support and interrupt capability.
  • Seite 112 E n v i r o n m e n t . E n v i r o n m e n t . E n v i r o n m e n t . E n v i r o n m e n t . E n v i r o n m e n t .
  • Seite 113 3D Audio Demo The 3 D A u d i o D e m o 3 D A u d i o D e m o 3 D A u d i o D e m o 3 D A u d i o D e m o 3 D A u d i o D e m o option shows a 3D audio demonstration with variable sound type, moving path and EAX settings.

  • Seite 114: Audio Wizard

    SPDIF The S P D I F S P D I F S P D I F S P D I F S P D I F option allows you to set the S/PDIF output and change the S/PDIF output frequency. Click the option button of your choice. Audio Wizard The A u d i o W i z a r d A u d i o W i z a r d...
  • Seite 115 Rear panel audio ports function variation Rear panel audio ports function variation Rear panel audio ports function variation Rear panel audio ports function variation Rear panel audio ports function variation The functions of the Line Out (lime), Line In (blue), Mic (pink), Rear Speaker Out (gray), Side Speaker Out (black), and Center/Subwoofer (yellow orange) ports on the rear panel change when you select the 4-channel, 6-channel or 8-channel audio configuration as shown in the...

  • Seite 116: Raid Configurations

    RAID configurations ® ® The motherboard comes with the ITE 8212F and the Intel ICH6R Southbridge RAID controllers that allow you to configure IDE and Serial ATA hard disk drives as RAID sets. The motherboard supports the following RAID configurations. R A I D 0 R A I D 0 R A I D 0...

  • Seite 117: Installing Hard Disks

    5.4.1 5.4.1 5.4.1 5.4.1 5.4.1 Installing hard disks Installing hard disks Installing hard disks Installing hard disks Installing hard disks The motherboard supports Ultra DMA 133/100/66 and Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array.

  • Seite 118: Intel Raid Configurations

    5.4.2 5.4.2 5.4.2 Intel Intel Intel ® ® ® ® ® RAID configurations RAID configurations RAID configurations 5.4.2 5.4.2 Intel Intel RAID configurations RAID configurations This motherboard supports RAID 0 and RAID 1 configurations for Serial ATA hard disks drives through the Intel ®...
  • Seite 119 At the bottom of the screen are the navigation keys. These keys allow you to move through and select menu options. ]-Change [TAB]-Next [ESC] Previous Menu [Enter]-Select Creating a RAID Volume Creating a RAID Volume Creating a RAID Volume Creating a RAID Volume Creating a RAID Volume To create a RAID volume: From the Intel Application Accelerator RAID Option ROM utility main...
  • Seite 120 T I P : T I P : T I P : T I P : T I P : For server systems, use of a lower array block size is recommended. For multimedia computer systems used mainly for audio and video editing, a higher array block size is recommended for optimum performance.
  • Seite 121 Press <Del> to delete the RAID volume. The following confirmation message appears. VOLUME DELETE VERIFICATION ALL DATA IN THE VOLUME WILL BE LOST!! Are you sure you want to delete volume "RAID_Volume0"? (Y/N) Press <Y> to confirm or <N> to return to the configuration Main Menu. Resetting RAID Disks Drives Resetting RAID Disks Drives Resetting RAID Disks Drives...

  • Seite 122: Ite 8212F Raid Configurations

    5.4.3 5.4.3 5.4.3 ® ® ® ® ® 8212F RAID configurations 8212F RAID configurations 8212F RAID configurations 5.4.3 5.4.3 8212F RAID configurations 8212F RAID configurations The ITE ® 8212F IDE RAID controller supports RAID 0, RAID 1, RAID 0+1 and JBOD configurations.
  • Seite 123 At the bottom of the screen are the navigation keys. These keys allow you to move through and select from the menu options. [1]..[5] Select [ESC] Exit Press the number of your selection or <Esc> to exit. Auto-configuring a RAID array Auto-configuring a RAID array Auto-configuring a RAID array Auto-configuring a RAID array...
  • Seite 124 Defining a RAID array Defining a RAID array Defining a RAID array Defining a RAID array Defining a RAID array This option allows you to define supported RAID arrays. To define a RAID array: From the IT8212 Setup Utility screen, press <2>. The following screen appears.
  • Seite 125 Use the up or down arrow keys to select editable fields. Use the Space bar to change field values. Press <Ctrl+Y> to save RAID array. Press <Esc> to exit. Deleting a RAID array Deleting a RAID array Deleting a RAID array Deleting a RAID array Deleting a RAID array This option allows you to delete an existing RAID array.
  • Seite 126 Rebuilding a RAID array Rebuilding a RAID array Rebuilding a RAID array Rebuilding a RAID array Rebuilding a RAID array This option allows you to reconstruct an existing RAID array. This option applies only to RAID1 (Mirrored) or RAID 0+1(Striped+Mirrored) sets. To rebuild a RAID array: From the IT8212 Setup Utility screen, press <4>.
  • Seite 127 Use the up or down arrow keys to select a drive, then press <Enter>. Follow succeeding screen instructions. Press <Esc> to exit. Viewing your RAID configuration Viewing your RAID configuration Viewing your RAID configuration Viewing your RAID configuration Viewing your RAID configuration This option allows you to view your RAID configuration.

  • Seite 128: Creating A Raid Driver Disk

    Creating a RAID driver disk A floppy disk with the RAID driver is required when installing Windows ® 2000/XP operating system. You can create a RAID driver disk using your motherboard support CD. To create a RAID driver disk: Insert the motherboard support CD into the CD-ROM drive. From the support CD Main Menu, select the D r i v e r s D r i v e r s D r i v e r s...

Inhaltsverzeichnis