Best Placement Of Cameras, Indoor Unit And Monitor - Conrad 75 42 63 Bedienungsanleitung

• Do not pull the mains adapter from the mains socket by pulling the cable.
• If a mains adapter is damaged, do not touch it. Danger to life from electric shock!
• First switch off the mains voltage for the mains socket to which the mains adapter is con-
nected (e.g. switch off the corresponding circuit breaker or turn out the fuse, switch off the
associated FI protection switch so that the mains socket is separated from the mains vol-
tage on all poles). Then unplug the mains adapter from the mains socket. Dispose of the
damaged mains adapter in an environmentally compatible way. Do not use it anymore.
Replace it with a new mains adapter of the same specifications.
• The product is only suitable for use in temperate, not tropical, climates.
• In commercial institutions, the accident prevention regulations of the Employer's Liability
Insurance Association for Electrical Systems and Operating Materials are to be observed.
• Do not leave packaging material unattended. It may become a dangerous toy for children.
• Handle the product with care. It can be damaged by impact, blows or when dropped even
from a low height.
6. Best Placement of Cameras, Indoor Unit and
Monitor
Indoor unit
(DVR/Monitor)
Surveillance
camera 1
Max. 5 m
The distance between surveillance camera and power
supply should not exceed the length of the surveillance
camera mains adapter cable. Do not use any extension.
Entrance door
TV/Monitor
Max. 5 m
Surveillance
camera 2
Wall hole with 15 mm diameter to
insert camera cable and plug into the
indoor area.
53