Technical Data - Bosch FLM-I 420-S Betriebsanleitung

10 en | Notes
1 Notes
Note: The device can only be connected to LSN panels.
Note: It is not permitted to use different addressing modes together.
2 Wiring
Pos. Description
1 b1+
2 a-
3 b2+
4 N/A
5 N/A
6 N/A
3

Technical data

Line voltage (V to V
min max
Max. rated continuous current, switch closed (l
Max. rated switching current under short condition (l
Max. leakage current, switch open (l
Max. series impedance, switch closed (Z
Line voltage, which leads from closed to open condition (V
V min)
so
Line voltage to allow the device to be put into closed condition by
the panel (V min to V
sc sc
Max. current consumption from LSN
during initialization, following initialization
Safety class as per IEC 60950
Protection class as per IEC 60529
Permitted operating temperature
Permitted relative humidity
Material and color interface module
Material and color surface-mount housing
2017.08 | 5.0 | F.01U.003.287
Free terminals, e.g. for looping through
external auxiliary voltage and for
)
max)
L
max)
C
max)
Connection
LSN
shielding.
15 to 33 V
max) 1.5 A
C
max) 1.7 A
S
23 μA
440 mΩ
max to 10 to 1 V
so
15 to 33 V
< 0.4mA, < 0.25mA
III
IP 54
-20 °C to 50 °C
< 96%
PPO (Noryl), off-white, similar to RAL 9002
ABS + PC-Blend, signal white RAL 9003
Installation note
Short circuit isolator
Bosch Sicherheitssysteme GmbH