Language; Base; Dial Mode; Recall - Silvercrest SGKT 50 A2 Bedienungsanleitung

If you want to reset the base only, you have to execute this function directly on the base.

LANGUAGE

Set the menu language for the handset as follows:

Press the  or  directional control buttons [4] to select the desired language (e.g.
"ENGLISH") from the list.

Press the Menu/OK button [12] to confirm your selection.

A confirmation beep will sound and the "SAVED" message will appear for a few
seconds on the display [2].

BASE

This menu allows you to perform more settings for the base.

DIAL MODE

There are two different options you can use.
TONE
Tone dialling is the most popular dialling method nowadays.
PULSE
Pulse dialling is normally used with older PBX devices.
Press the  or  buttons on the multifunction control [4] to select the desired option. To save the
selected setting, press the Menu/OK button [12]. A confirmation beep will sound and the "SAVED"
message will appear for a few seconds on the display [2].

RECALL

You can use the Recall/Flash function with the Menu/OK button [12] on your handset or the Calls
list (Recall/Flash) button [20] on the base during a phone call. If your telephone is connected to a
PBX, you can use this function for switching to an internal conversation or to forward the call. The
Recall/Flash function of the handset or base will cause a short, temporary line interruption.
The following options are available:
SHORT
100 ms interruption.
LONG
300 ms interruption.
SilverCrest SGKT 50 A2
English - 25