Hama RTR-100 Bedienungsanleitung Seite 12

Connecting the FM-Transmitter "RTR-100" to the radio:
Place the FM-Transmitter in the vicinity of the
radio/hifi system or the antenna.
A. Radios with auto-scan / station search
– First fi nd a free frequency on your radio (e.g. 93.6 MHz).
– Remember the frequency set.
– Now switch on the FM-Transmitter and set the required frequency.
Connect it to the playback device (e.g. MP3 player, mobile phone etc.)
and play the music.
– Start the station search function of the radio device to fi nd the frequency
set. You may have to make fi ne adjustments to the FM-Transmitter or the
frequency setting.
– Important: This distance to the nearest radio station
must be at least 0.2 MHz.
B. Radios with manual adjustment
– With these radios, you must also fi rst fi nd a free frequency range
(e.g. 97.9 MHz) (where only noise can be heard).
– Read the free frequency (e.g. 97.9 MHz) from your radio and set it
on the FM-Transmitter "RTR-100".
– Now all you have to do is connect an audio device (e.g. mobile phone,
laptop etc.) to the FM-Transmitter and start music playback.
11