Maintenance And Service; Maintenance And Cleaning; Warranty Condition - Bosch PLS 300 Set Originalbetriebsanleitung

Practical Advice
Problem
Tile does not break along
the cutting line
For working instructions and practical advice on
the PLS 300 saw station, log onto:
www.bosch-do-it.com/pls300

Maintenance and Service

Maintenance and Cleaning

If the saw station should fail or become dam-
aged despite the care taken in manufacture and
testing, repair should be carried out by an au-
thorised customer services agent for Bosch
power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the saw sta-
tion.
Cleaning
Remove dust and chips after each working pro-
cedure by blowing out with compressed air or
with a brush.
Bosch Power Tools
Cause
Scoring line not continuous from
front to end
Tile cutter 14 incorrectly inserted
Surface structure of tile uneven
Break-off cones incorrectly posi-
tioned when breaking the tile
Scoring line not continuous from
front to end
Corrective Measure
Apply more pressure (uniformly)
when scoring the tiles and score
over the complete surface
Insert tile cutter correctly
(see figure H1)
Apply more pressure (uniformly)
when scoring and increase the
scoring (cutting) speed
Position break-off cones below
the cutting line and at the edges of
the tile (see figure H3)
For diagonal cuts, position the
break-off cones somewhat further
toward the inside
Increase scoring pressure when
cutting the tiles
For further questions, please refer to our cus-
tomer hotline:
Great Britain
Tel: +44 (0844) 736 0107
Australia, New Zealand
Phone: +61 (01300) 307 044

Warranty Condition

Through faulty usage, sawing into the guide rail
4 or bridge 8 can occur. No warranty claims
whatsoever shall arise thereof, as this does not
affect the function of the saw station.
English | 23
1 609 929 W68 | (3.3.10)