IKEA Renlig FWM8 Gebrauchsanleitung Seite 9

ENGLISH
7
Super Quick button
8
Rinse Hold button
9
Spin reduction
Programme knob
Display
A B C
Delay Start button
It allows you to switch the appliance On/Off and/or to select a
programme.
The display shows the following information:
• A - Delay Start indicator
The indicator comes on the display when the related option is
set.
• B - Child safety lock
This device permits you to leave the appliance unattended
during it's functioning.
• C – Digit:
– Duration of the selected programme. After selecting a
programme, the duration is displayed in hours and mi-
nutes (for example
tomatically on the basis of the maximum recommended
load for each type of fabric. After the programme has
started, the time remaining is updated every minute.
– Delayed start. The selected delay appears on the display
for a few seconds, then the duration of the selected pro-
gramme is displayed again. The delay time value decrea-
ses by one unit every hour and then, when 1 hour re-
mains, every minute.
– Alarm codes. In the event of operating problems, some
alarm codes can be displayed, for example (see para-
graph «Troubleshooting»).
– Incorrect option selection. If an option which is not com-
patible with the set wash programme is selected, the mes-
sage is displayed at the bottom of the display for a
few seconds. The integrated red indicator of button
start flashing.
– End of programme. When the programme has finished
the flashing zero
indicator of button
The programme can be delayed from 30 min - 60 min - 90min, 2
hours and then by 1 hour up to a maximum of 20 hours by
means of this button.
10
Temperature button
). The duration is calculated au-
is displayed, the indicator
go out. The door can be opened.
9
and the