Connecting Bluetooth Devices; Bluetooth Operations; Pairing - Sony MEX-BT3100U Bedienungsanleitung

Connecting
Bluetooth devices

Bluetooth operations

The Bluetooth function allows for handsfree
calling and music streaming via this unit.
To use the Bluetooth function, the following
procedure is necessary.

 Pairing

When connecting Bluetooth devices for
the first time, mutual registration is
required. This is called "pairing."
Registration is required only for the first
time, as this unit and the other devices
will recognize each other automatically
thereafter.
 Connection
To use the device after pairing is made,
start the connection. Sometimes pairing
allows for connection automatically.
 Handsfree calling/Music streaming
You can make/receive handsfree calls
and listen to music when the connection
is made.
If pairing is not possible, your device may
not be compatible with this unit. For details
on compatible devices, visit the support site
on the back cover.
Installing the microphone
To improve audio quality while talking
through this unit, you need to install the
microphone (not supplied).
For details on how to connect the
microphone, refer to the supplied
"Installation/Connections" guide.
Operating the Bluetooth
functions
1 Press .
The call menu appears.
2
Rotate the control dial until the desired
item appears, then press it.
3
Press (BACK)*.
The source returns to the Bluetooth
phone.
* For PAIRING, REDIAL, VOICE DIAL and BT
SIGNL settings, step 3 is not necessary.
The following items can be set:
PAIRING* (page 20)
1
PHONEBOOK (page 23)
REDIAL (page 23)
RECENT CALL (page 23)
VOICE DIAL (page 24)
DIAL NUMBER (page 23)
RINGTONE* *
1 2
Selects whether this unit or the
connected cellular phone outputs the
ringtone: "1 (this unit)"- "2 (cellular
phone)."
AUTO ANS* (Auto Answer)
1
Sets this unit to answer an incoming call
automatically: "OFF"-"1 (about 3
seconds)"-"2 (about 10 seconds)."
BT SIGNL* (Bluetooth Signal) (page 21, 22)
1
BT INIT* (Bluetooth Initialize) (page 26)
3
*1 You can also select these items by pressing
 and rotating the control dial to
select "BT."
*2 Depending on the cellular phone, this unit's
ringtone may be output even if set to "2
(cellular phone)."
*3 Appears on the setup menu when the unit is
turned off.
19