Endress+Hauser FEC 22 Betriebsanleitung Seite 40

11 Technical Data
Operating conditions
Mechanical construction
User interface
Power supply
Certificates and approvals
Ordering
Standards, guidelines
40
Installation
Mounting
Environmental conditions
Ambient temperature range
Limiting temperature range
Storage temperature range
Climatic class
Ingress protection
Vibration resistance
Electromagnetic compatibility Interference Emission to EN 61326; Electrical Equipment Class B
Housing
Design
Dimensions
Weight
Material
Electrical connection
Outside the protective cover
Green LED
Red LED
Under the protective cover
5 LEDs
2 keys
Rotary switch
AC version
DC version
Certificates
CE Mark
Order No.: 942299-0000
Order No.: 942299-1000
Supplementary
Documentation
In any orientation. Mounting only in housings F6, F10 or T3
(with raised cover) of Multicap T or Multicap probes.
-40 °C...+70 °C
-40 °C...+80 °C
-40 °C...+85 °C
Climatic protection to IEC 68, Part 2...38, Fig. 2a
IP 20
To IEC 68 Part 2-6, 10...55 Hz, 0.15 mm, x,y,z
Interference Immunity to EN 61326; Annex A (Industrial) and
NAMUR Recommendation NE 21 (EMC).
Compact instrument
103 mm x 67 mm x 49 mm
0.3 kg
Plastic
See Section 3, Page 28-29
Stand-by
Switching status:
AC version (relays de-energised)
DC version (switching output blocked)
Display of gradations with values
Calibration / assigning values
For selecting 8 different settings (see Page 31)
AC 90 ...253 V, 50/60 Hz, current consumption approx. 10 mA at 230 V
Three-wire DC connection PNP, DC 10 V...55 V
EC-Type-examination certificate
KEMA 99 ATEX 3122, XA 060F/00/a3
By attaching the CE Mark, Endress+Hauser confirms that the
electronic insert FEC 22 fulfils all legal requirements of the relevant EC
directives.
FEC 22 in AC version
FEC 22 in DC version
Multicap T DC .. TE. probe, TI 240F/00/en
Multicap T DC .. TA. probe, TI 239F/00/en
Multicap DC .. E. probe, TI 242F/00/en
Multicap DC .. A. probe, TI 243F/00/en
Elektronic insert FEC 22
Endress+Hauser