AEG PDU 10-2 Betriebsanleitung Seite 20

includes opening the housing). AEG will accept no liability for
consequential damage. AEG will rescind all obligations such
as warranty agreements, service contracts, etc. entered into
by AEG or its representatives without prior notice in the event
of maintenance and repair work being carried out with
anything other than original AEG parts or spare parts
purchased from AEG.
Handling
The power distribution unit is designed and constructed so
that all necessary steps for start-up and operation can be
performed without any internal manipulation of the product.
Maintenance and repair work may only be performed by
trained and qualified personnel.
Illustrations are provided to clarify and facilitate certain steps.
If danger to personnel and the unit cannot be ruled out in the
case of certain work, it is highlighted accordingly by
pictographs explained in the safety regulations of chapter 3.
Hotline
If you still have questions after having read these operating
instructions, please contact your dealer or our hotline:
Tel.: +49 (0)180 5 234 787
Fax: +49 (0)180 5 234 789
Internet: www.AEGpartnerNet.com
Copyright
No part of these operating instructions may be transmitted,
reproduced and/or copied by any electronic or mechanical
means without the express prior written permission of AEG.
© Copyright AEG 2009. All rights reserved.
20