Connecting Analog Audio Sources; Connecting Digital Audio Sources; Connecting Rdi; Plugging In - Pioneer F-F6-J Bedienungsanleitung

Connections
Connecting analog audio
sources
LINEOUT
L
ANTENNA CONTROL
R
DAB
IN OUT
To analog input
Amplifier
• Use the RCA/phono jack audio cable to
connect this unit's LINE OUT connectors
to the analog input connectors of an
amplifier.

Connecting digital audio sources

LINEOUT
L
ANTENNA
R
DAB
To digital audio
input (coaxial)
Amplifier with built in D/A converter
• If you want to enjoy listening to the digital
output audio of the DAB, connect to an
amplifier supplied with a digital coaxial or
optical input.
DIGITAL OUT RDI OUT
COAXIAL OPTICAL OPTICAL
DIGITAL OUT RDI OUT
CONTROL
IN OUT COAXIAL OPTICAL OPTICAL
To digital audio
input (optical)
• Digital audio out: Connections with
equipment having a digital input such as
an amplifier or an MD recorder. The digital
audio output terminal of this unit (either
DIGITAL OUT OPTICAL or DIGITAL OUT
COAXIAL) should be connected with the
digital input terminals of an amplifier, MD
recorder, or other component (OPTICAL or
COAXIAL).

Connecting RDI

The RDI (Receiver Data Interface) optical
connector provides access to multiplex data.
This is used to connect to a computer or other
external data source in order to access
services that are expected to be added in the
future.
These services may not yet be provided in your
reception area.
DIGITAL OUT RDI OUT
CONTROL
IN OUT COAXIAL OPTICAL OPTICAL

Plugging in

Make sure to complete all connections before
connecting to an AC outlet.
• Connect the power cord to the AC inlet
(AC IN) on the rear panel of the tuner, then
plug into a AC outlet.
To digital audio
input (optical)
02
9
En