Yamaha AV-S77 Bedienungsanleitung Seite 19

I Connecting the front speaker unit and the subwoofer
Front speaker unit
SYSTEM
CONNECTOR
MARK MARK
(WHITE)
To
Insert the
plug with its
b mark
facing up.
Make sure that the plugs and connectors are positioned correctly before inserting them.
1. Connect SYSTEM CONNECTOR
cable (plug: white).
2. Connect SYSTEM CONNECTOR
cable (plug: black).
3. Connect SYSTEM CONNECTOR
To remove the connector of the speaker cable
Remove the connector while keeping the tab pressed down.
Notes
• Do not insert the plug or connector forcibly. Doing so may damage the plug, connector or terminal.
• Do not scratch, forcibly bend, or pull the system connector or speaker cable as this may damage the cable, causing loss of audio output, and
may possibly result in a fire or electric shock. Take particular care in making sure that the cable is not squashed by a rack or caster.
• Before disconnecting or connecting the system connector cable, set the front speaker unit to standby mode and then disconnect the power
supply cord of the subwoofer.
Insert the connector
with its tab facing up.
(BLACK)
SPEAKERS
Speaker cable
To
(provided)
To
Insert the plug with
its b mark facing up.
System connector cable (plug: black) (provided)
System connector cable (plug: white) (provided)
on the front speaker unit and the subwoofer using the provided system connector
on the front speaker unit and the subwoofer using the provided system connector
on the front speaker unit and the subwoofer using the provided speaker cable.
Subwoofer
To
(BLACK)
To the rear speakers
To
Insert the plug with
its b mark facing up.
Keep pressing the tab and
remove the connector.
CONNECTIONS
DO NOT CONNECT THIS UNIT TO
SPEAKERS OTHER THAN AV-S77C,
NX-S77E
SPEAKERS
PHONES
SILENT
SYSTEM
MARK MARK
(WHITE)
CONNECTOR
To
Insert the plug
with its b mark
facing up.
17
E-