Selecting The Units Of Measurement - Westfalia RJ-7521 Bedienungsanleitung

crease more quickly. Reaching the top value of
200 Nm one further activation of the + button will
switch the value back to 40 Nm. Reaching the
40 Nm value by pressing the - button one further
activation of the - button will switch the value
back to 200 Nm.
The set up target torque value will be shown for
10 seconds. Then the panel will switch back to
"0.0". Now this setting is stored and you can
attach the wrench to the ½" socket (1). The cur-
rent torque will be displayed now.

Selecting the Units of Measurement

1. Press "M" (3) and "Peak/Trace" (4) buttons
together to select different torque units.
You can set up the following units:
K-cm for Kilogram per centimetre (kg-cm)
K-m
l-lb
F-lb
N-m
for Kilogram per meter (kg-m)
for inch per pound (in-lb)
for foot per pound (ft-lb)
for Newton meter (Nm).
Using
15