Connecting With A Hdmi-Cable; Connecting A Digital Audio Receiver - AEG DVB-T 4544 Bedienungsanleitung

Купить в интернет-магазине http://clatronic-shop.com.ua
 Connect the SCART cable to the video recorder. Note
the operating instructions supplied for your video
recorder.
Important! for Video recording with the
DVB-T 4544
 Before beginning to record, set the volume of
the DVBT receiver to maximum using the DVB-T
receiver remote control.
 While recording, you should not make any
functional adjustments to your DVB-T receiver,
since the screen messages will also be recorded.
Connection schematic with scart cable

Connecting with a HDMI-cable

 Connect the antenna cable's connector to the "ANT IN"
antenna connection on the receiver.
 Insert the HDMI cable into the "HDMI" HDMI-connec-
tion on the receiver.
 Connect the HDMI cable to the TV set. Note the oper-
ating instructions supplied for your TV set.
ТВ-ресивер AEG DVB-T 4544
Connection schematic with scart cable

Connecting a digital audio receiver

If you would like to use 5-channel audio transmission
(Dolby Digital Sound/AC3), you must connect your digital
audio receiver to the DVB-T 4544 receiver's coaxial output.
 Connect the coaxial cable to the "SPDIF" port at the
 Connect the coaxial cable to the digital audio receiver.
Caution!
Note the specifications for connecting in the operating
instructions supplied with your digital audio receiver.
The coaxial cable is not included in delivery.
receiver.
ENGLISH
31