Programming Macros; Executing Macros - Medion LIFE E74003 Handbuch

Programming macros

Using a macro, you can save a chain of commands, meaning that several
functions can be executed consecutively.
The macro can include up to ten key commands. A macro can include different
devices. In this way you could, for example, switch on the TV set, the desired
channel, the video recorder and the recording function.
 Press down the required source key, together with the M1 macro key, until
the LED lights up.
 Now carry out the functions that you would like to save as a macro in the
desired sequence. The LED will extinguish briefly each time the button is
pressed.
 To save the macro, press the macro key M1 (the macro will be saved
automatically after the 10th key has been pressed). The LED extinguishes.
Example
You want switch on the television, then to see the SAT receiver and the
channel information:
 Hold down button TV1 and M1 at the same time.
 Press the
 Press SAT1 (to change to the source of the SAT receiver).
 Press EPG (the channel information of the SAT receiver will be
opened later with it).
 Store the macro with M1.

Executing macros

 To execute a macro, briefly press the M1 key once in the normal mode.
 The macro will carry out the stored functions successively.
key (the TV device will be switched on later with it).
ES
EN
DE
13