Conrad 75 17 16 Bedienungsanleitung Seite 26

Observe that names and descriptions of the installation procedure, as described here, may be
changed in newer versions of the software. There is a very detailed description of camera and
software in English on the CD..
• Double click the "IPCamSetup.exe" desktop
icon. The IPCamSetup programme will be
opened (see figure B).
• The main screen of the software appears; Click-
ing "Auto Detect" starts the camera search.
• The camera should be found here. Click the line
with recognised cameras (the IP address and
the MAC address are displayed; see figure C).
Figure C
• Select the MAC address; "Network Setting" on the
right shows the following information: IP, Net
Mask, Gateway, Port Number 1, Camera Name
(see figure D).
• Where required, adjust the IP address, net mask,
gateway and camera name and click "SETUP" to
save the settings.
Please note: Any IP address must only be provided once in each network. The first three
digits must be the same in the network (e.g. 192.168.1.x, in which "x" may be between
1 and 254). The subnet must also be set up correspondingly for all devices (e.g.
255.255.255.0).
26
Figure B
Figure D