Using Room Monitoring; Setting The Volume - Medion LIFE P67001 MD 84645 Bedienungsanleitung

9. Using room monitoring

 Do not place the baby unit or cable in the cot or within reach of the
baby (at least one metre away).
 Place the baby unit on a firm, flat surface where it cannot fall down
or attach it firmly to the wall (see above).
 Press and hold the
until the power LED lights up.
 Now switch on the parent unit by pressing and holding down the
button.
 The two units will now connect with each other automatically.
If, however, the baby station does not connect to the parent station, the
icon and NO CONNECTION flash on the display.
The pairing LED on the device also flashes.

9.1. Setting the volume

Parent unit
Use the arrow keys  and  to set the volume of the speaker.
Baby unit
Press the  or  button to adjust the volume of the speaker.
22 of 106
button on the baby unit for a few seconds