Miele STB 201 Gebrauchsanweisung Seite 10

G
Use
Fitting the Turbobrush
Model STB 205
This Turbobrush is intended for use with
Miele vacuum cleaners.
^ Instead of the usual floor attachment,
fit the Turbobrush to the suction tube.
Ensure that the locking device
engages.
Model STB 201 Vario
This Turbobrush has an adaptable
connector. It can fit suction tubes with a
diameter of between 30 and 38 mm.
Only use the Turbobrush however with
vacuum cleaners that have a high
power performance.
Opening the air adjustment
slide
The Turbobrush is driven by the
suction power of the vacuum cleaner.
With thick pile carpets the brush roller
can rotate more slowly if the suction
opening is choked with carpet pile,
impeding the flow of air. This may result
in the carpet surface not being brushed
to satisfaction.
^ Open the air adjustment slide (left
hand illustration).
In all other situations the air adjustment
slide should be closed, to benefit from
the full suction power.
^ Close the air adjustment slide (right
hand illustration).
10