Connecting A Recorder (Cdr, Mdr, Etc.), Av Receiver Or Decoder (Cdr, Mdr, Etc.); Connecting Power Cables - Yamaha PianoCraft MCR-940 Bedienungsanleitung

Connecting a TV to the system
1 Connect the system and your TV via the HDMI jack, COMPONENT jacks or VIDEO jack of the BD player and the
corresponding jack(s) of your TV.
2 Set "TV screen" according to your TV (see "Setting the TV display" on page 13).
BD player (BD-940)
When connecting the system and your TV via the COMPONENT jacks, set the BD player as described in "Video Out
Select" (☞p.33).
When connecting the system and your TV via the HDMI jacks, set "HDMI Video Out" and "Audio Out" of "Audio
Video Settings" in the "Settings" menu (☞p.33, 34).
When connecting the system and your TV via the HDMI jacks, use HIGH SPEED HDMI cables that have the HDMI
logo (as shown on the cover).
Connecting a recorder (CDR, MDR, etc.), AV receiver or decoder (CDR,
MDR, etc.)
You can output audio from the DIGITAL OUT jack and record it digitally on another device, or transmit audio signal to
an AV receiver or decoder to enjoy multichannel source audio.

Connecting power cables

After you made all connections, connect the power cables of this system and other components to AC wall outlets.
Receiver (R-840)
BD player (BD-940)
Composite video cable
(supplied)
To AC wall outlet
To AC wall outlet
PREPARATIONS
9
En