Manual Settings; Keep Network Connection In Standby; Setting The Time; Setting The Language - Medion LIFE P85035 Bedienungsanleitung

Manual settings

 Under MANUAL SETTINGS, select a cable (Ethernet) or wireless (WiFi) con-
nection and set the respective DHCP function to ON or OFF.
Changing the NetRemote PIN
Under NETREMOTE PIN SETUP, you can reassign the four-digit code that
must be entered for the connection to the Lifestream II application on a smart-
phone or tablet PC.
Deleting a network profile
The device stores the last 4 WiFi networks to which a connection was established.
 Select a network under NETWORK PROFILE and press OK. Confirm the
subsequent query with YESto delete the network from the list.
NOTE!
The currently connected network cannot be deleted.

Keep network connection in standby

 Select this menu item and set the function to YES if you want the Internet ra-
dio to remain connected to the network even when in standby mode or when
using operating modes that do not require WiFi (AUX IN, FM radio, DAB radio,
USB playback). Other media players can then access the Internet radio and "wake
it up".
 If the network connection is not to be maintained, set the function to NO. With
this setting, the WLAN function will also be disabled for operating modes that do
not use a WLAN (AUX-IN, FM radio, DAB radio, USB playback). It will not be possi-
ble to control the device using the Lifestream II app in this case.
NOTE!
Please note that when a network connection is maintained in standby
(setting YES), the Internet radio will consume more power in standby
mode than indicated in the technical data.

18.3. Setting the time

Set the time and date under TIME SETTINGS as described in the section 'Using
the device for the first time' .

18.4. Setting the language

You can set the menu language under LANGUAGE.
84 of 142