Specifications - Makita 1911B Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Knob
2-1. Switch trigger
3-1. Lock button / Lock-off button
3-2. Switch trigger
4-1. Socket wrench
4-2. Installation bolt
5-1. Bolt
5-2. Drum
5-3. Planer blade
5-4. Drum cover
5-5. Adjust plate

SPECIFICATIONS

No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for planing wood.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : planing softwood
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
Explanation of general view
6-1. Adjust plate
6-2. Screws
6-3. Heel of adjust plate
6-4. Back side of gauge base
6-5. Blade edge
6-6. Planer blade
6-7. Inside edge of gauge plate
6-8. Gauge plate
7-1. Screwdriver
7-2. Nozzle assembly
8-1. Vacuum cleaner
Model
Planing width
Planing depth
-1
)
Overall length
Net weight
Safety class
) : 88 dB(A)
pA
) : 99 dB(A)
WA
2
) : 3.5 m/s
h
2
ENE001-1
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
ENF002-2
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
ENG102-3
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
ENG222-2
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Power Planer
Model No./ Type: 1911B
ENG901-1
are of series production and
Conforms to the following European Directives:
2006/42/EC
3
9-1. Start
9-2. End
11-1. Align the (Y) groove with the edge
of the workpiece
12-1. Sharpening holder
13-1. Wing nut
13-2. Blade (A)
13-3. Blade (B)
13-4. Side (C)
13-5. Side (D)
1911B
110 mm
2 mm
16,000
355 mm
4.3 kg
/II
Corporation as the
ENH101-15
responsible