Advice On Disposal - Bosch sensixx B10L Gebrauchsanleitung

• This appliance has been designed exclusively
for domestic use and must not be used for
industrial purposes. This appliance must be
used only for the purposes for which it was
designed, i.e. as an iron. Any other use will be
considered improper and consequently
dangerous. The manufacturer will not be held
responsible for any damage arising from
misuse or improper use.
• This appliance is to be connected and used in
accordance with the information stated on its
characteristics plate.
• This appliance must be connected to an
earthed socket. If it is absolutely necessary to
use an extension cable, make sure that it is
suitable for 16A and has a socket with an earth
connection.
• If the safety fuse fitted in the appliance blows,
the appliance will be rendered inoperative. To
restore normal operation the appliance will
have to be taken to an authorised Technical
Service Centre.
• The appliance must never be placed directly
under the tap to fill the water tank.
• Unplug the appliance from the mains supply
after each use, or if a fault is suspected.
• The electrical plug must not be removed from
the socket by pulling the cable.
• Never immerse the iron in water or any other
fluid.
• Do not leave the appliance exposed to weather
conditions (rain, sun, frost, etc.)
Description
1. Boiler´s cap
2. Removable iron pad *
3. Mains cable and hose storage compartment
4. Mains cable
5. Steam hose
6. "Steam ready" pilot light
7. "on / off" pilot light (on)
8. Main power switch (0/I)
9. Housing with internal steam generator
10. Temperature control knob
11. Steam release button
12. Iron pilot light
13. Soleplate
14. Steam button lock *
15. Filling funnel
16. Carrying handles
* model dependent
Important:
▪ This appliance reaches high temperatures and
produces steam during use, this could cause
scalds or burns if not used properly.
▪ The steam hose, base station, metal plate at
the bottom of the removable iron pad (2*) and
in particular the iron can get hot when used.
This is normal.
▪ Never aim the steam at people or animals.
▪ Do not allow the power cable to come into
contact with the soleplate when it is hot.
▪ Be aware that the system can keep on
steaming for a short additional time after
releasing the steam trigger. This is a normal
function.

advice on disposal

Our goods come in optimised packaging. This
basically consists in using non-contaminating
materials which should be handed over to the
local waste disposal service as secondary raw
materials. Your local town council can give you
information about how to dispose of obsolete
appliances.
This appliance is labelled in
accordance with European Directive
2012/19/EU concerning used
electrical and electronic appliances
(waste electrical and electronic
equipment - WEEE).
The guideline determines the framework
for the return and recycling of used
appliances as applicable throughout the
EU.
preparation
1. Remove any label or protective covering from
the soleplate.
2. Place the appliance horizontally on a solid,
stable surface.
model dependent:
You may remove the iron pad (2) from the
appliance and place the iron on it on another
solid, stable, horizontal surface. Never rest the
iron on the appliance without the iron pad!
3. Open the boiler´s cap (1). Fill the boiler
carefully using always the funnel (15), and
close the cap firmly.
Filling with warm water reduces the waiting
time for heating up.
Do not overfill the boiler.
4. Unwind the mains cable (4) fully and plug it into
an earthed socket.
5. Switch the main power button (8) on (position "I")
13
BOS CH