Hama RC 650 Bedienungsanleitung Seite 6

• After setting the date, you will be able to select the language in which the weekday
will be displayed. You can choose between the following languages:
GER for German, ENG for English, FRA for French, ITA for Italian, NET for Dutch, ESP
for Spanish, DAN for Danish
Note – Summer time
The clock automatically switches to summer time. S appears on the display as long
as summer time is activated.
Note – Time zone
• The time zone is used if the DCF time signal is received in a country whose time
zone does not correspond to German time.
• If the time shift is +1 hour, for example, you need to set the time zone to +1. This
will automatically set the clock forward one hour.
5.3 Setting the alarm
Setting Alarm 1
• Press the AL1 (7) button. The bell icon appears.
• Press the AL1 (7) button for approx. 3 seconds until the hour digits start flashing.
You can set the hours with the UP (8) and DOWN (10) buttons.
• Press the SET (9) button until the minutes digits start flashing. You can set the
minutes with the UP (8) and DOWN (10) buttons.
• Press the SET (9) button to save the set alarm time.
Setting Alarm 2
• Press the AL2 (11) button. The (bell) icon appears.
• Press the AL2 (11) button for approx. 3 seconds until the hour digits start flashing.
You can set the hours with the UP (8) and DOWN (10) buttons.
• Press the SET (9) button until the minutes digits start flashing. You can set the
minutes with the UP (8) and DOWN (10) buttons.
• Press the SET (9) button to save the set alarm time.
Activating Alarm 1/Alarm 2:
• Press AL 1 to activate Alarm 1. The bell icon appears above the time
• Press AL 2 to activate Alarm 2. The bell icon appears below the time
• Alarm 1 and Alarm 2 can both be activated at the same time.
5