Setting The Time Upon Initial Start-Up - Kärcher Senso Timer ST6 eco!ogic Handbuch

Note: As soon as the battery is inserted, the time flashes automatically.
Ok
Ok
Note: From now on, the receiver waits for the radio signal of the sensor for teaching. During
this time, the radio signal is flashing and the seconds countdown is counted
down.
Important: In order to establish the radio contact between the receiver and the sensor, the
sensor battery must be inserted within 60 seconds.
20

Setting the time upon initial start-up

 Set the hours by means of the arrow keys.
 Confirm with the OK button.
The minutes are flashing.
 Set the minutes by means of the arrow keys.
 Confirm with the OK button.
 The time is set.
EN
– 4