Blaupunkt Lavender 2041 Bedienungsanleitung Seite 14

www.blaupunkt.com LV 2041
5) To remove the filter 3 (activated carbon filter),
grab its tag and pull it towards you, then replace
the new activated carbon filter. (e)
6) To remove the filter 4 (HEPA filter), grab its tag
and pull it towards you, then replace the new HEPA
filter. (f)
Note: The sequencing to put filters back into the
appliance, please refers to the drawing of page 4 --
"product structure".
7) To reattach the back panel, insert the bottom
hooks into the bottom of the appliance first, then
push the panel against the body of the appliance.
(g)
8) Put the plug in the wall socket and switch on the
appliance again. (h)
2. Reset Filter's lifetime.
Even you replace the new filters, when you switch on
the appliance, the light of filter icon still flash, you
need to reset the filter's lifetime, so that the appliance
can cycle to calculate the filters' working time.
Press the button, the light still turn on but not flash, it
means you choose this filter No. to reset, press and
hold button for 3 seconds, the light of filter turn off, the reset finished.
13