Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USB RECORDING
Recording a programme from the chan-
nel list
1 Open the »CHANNEL LIST« with »OK«.
2 Select a television channel with »
<
>
»
« or »
« and press »OK« to confirm.
3 Press »MENU« to exit the channel list.
4 Press »
« to start recording.
– Information on the recording is displayed:
the recording symbol, the channel name,
the programme, the recording time and
the available memory space.
– After a short time this information
disappears.
5 Press »
« to stop recording.
7
6 Confirm the display with » « (green);
or
press » « (red) to continue the recording.
Set the lead/follow-up time
With this function you can change the recording
time set by the electronic TV guide.
If you think that a program will start a few
minutes earlier or will end several minutes later,
you can „add" up to 60 minutes to this time.
1 Display channel information with »GUIDE«.
2 Switch to the timer function with »
(yellow) and then select the »Personel
recording time edit« menu with » « (green).
3 Change the start time with »
4 Use »
« to switch to the »End« row and
V
change the end time with »
5 Save the setting with » « (green).
6 Switch off the program information with
»GUIDE«.
EN 80 / 38
-------------------------------------------------------------------------------------------
Presetting programmes to be
recorded
... using the electronic TV guide
«, »
«,
V
Λ
You can use data from the electronic TV guide
for recording.
20 programmes can be preset for the timer
recording or as a reminder.
1 Press »GUIDE« to display channel
2 Select the preferred channel with »
3 Switch to the information about the current
4 Select the programme of your choice with
5 Confirm the programme with »
«
6 Press »MENU« to exit the menu.
<
>
« or »
«.
<
>
« or »
«.
information.
– The electronic TV guide appears.
»
«.
Λ
>
programme with »
«.
»
« or »
«.
V
Λ
– The symbol »
« appears after the name
of the programme, and the data has been
added to the timer.
Note:
If the data for the recording is to be
7
changed, use »
« (yellow) and »
(blue) to switch to the »SCHEDULED
EVENTS«, press » « (green), change the
data and save it with » « (green).
Notes:
Before the timer recording begins, a
7
warning message appears with a 20-second
countdown. You can switch over to the
programmed television channel.
If the timer recording starts during
7
playback, playback is not interrupted:
Recording takes place automatically in the
background as long as you do not select
»Yes« when the timer countdown message
is shown.
Note for UPC customers only: When a
7
program is recorded, it can happen that
a part of the previous or next program is
included in the recording schedule due to
possible electronic TV guide inaccuracies.
Please be advised that in this case, when
one or more of these programs are parental
rated, the highest access level will be
applied for the entire recording.
Television / User Manual
« or
V
«.
«
Werbung
Inhaltsverzeichnis
