First Steps; Switching The Camera On/Off; Fixing The Camera In The Mount - Medion MD 86743 Bedienungsanleitung

First steps

Switching the camera on/off

 Hold down the P O W E R button for 2 seconds. The
camera will vibrate briefly 3 times to signal that the
device is now switched on.
The operating LED will light up blue when the de-
vice is switched on.
 In order to turn the camera off again, hold down the
P O W E R button once again. The camera will vi-
brate briefly once to signal that the device has been
switched off. The operating LED will go out.
NOTE!
If the camera does not switch on, check if the
battery is charged.

Fixing the camera in the mount

 Clamp the camera into the camera mount.
 Lock the camera mount by pulling the clamping le-
ver downwards.
 Depending on the type of use, select a suitable
mount and push the camera mount into the slot un-
til it audibly clicks into place.
DE
EN
FR
NL
ES
DK
IT
15