Standard Accessories; Battery Removal/Installation - Hitachi DV 14DMR Bedienungsanleitung

English
CHARGER
Model
Charging voltage
Weight

STANDARD ACCESSORIES

1 Plus driver bit (No. 2 × 65L) ...... 1
2 Charger (UC14YFA) ......................... 1
DV14DMR
3 Side handle ...................................... 1
4 Plastic case ....................................... 1
1 Plus driver bit (No. 2 × 65L) ...... 1
2 Charger (UC24YFA) ......................... 1
DV18DMR
3 Side handle ...................................... 1
4 Plastic case ....................................... 1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
1. Battery (EB14B, EB1424, EB1426H, EB1430H)
(For DV14DMR)
2. Battery (EB1820L, EB1824L, EB1826HL, EB1830HL)
(For DV18DMR)
Optional accessories are subject to change without notice.
9
UC14YFA/UC24YFA
7.2 – 14.4 / 7.2 – 24 V
0.6 kg
APPLICATIONS
Drilling of brick and concrete block, etc.
Driving and removing of machine screws, wood
screws, tapping screws, etc.
Drilling of various metals
Drilling of various woods

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latch (2
pcs.) to remove the battery (see Figs. 1 and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
CHARGING
Before using the impact driver drill, charge the battery as
follows.
1. Connect the charger's power cord to a receptacle
When the power cord is connected, the charger's
pilot lamp will blink in red (At 1-second intervals).
2. Insert the battery into the charger
Firmly insert the battery into the charger till it contacts
the bottom of the charger and checking the polarities
as shown in Fig. 3.
CAUTION
If the batteries are inserted in the reverse direction,
not only recharging will become impossible, but it
may also cause problems in the charger such as a
deformed recharging terminal.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously
in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red (At 1-second intervals) (See
Table 1).
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or
the rechargeable battery.