Herunterladen Inhalt Inhalt Diese Seite drucken

Setting Button Functions (Key Prg); Traffic Information; Switching Traffic Information Priority On/Off - Bosch MR12 Bedienungs- Und Einbauanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
Radio operation | Traffic information
f Press the MENU 5 button repeatedly
until "HCUT" appears on the display, along
with the current setting of "OFF", 1 or 2
(strength of the interference level cut).
f Turn the volume control 1 to the left or
right in order to adjust "HCUT" or to turn it
off.
f Press the MENU 5 button, repeatedly if
necessary, to close the menu.

Setting button functions (KEY PRG)

You can set the short press function of the
and
6 buttons in radio operation. The
following settings are available:
AUTOSEEK: Automatically search for the
f
next receivable station.
MANSEEK: Manually alter the frequency in
f
steps.
PRSTSCAN: Sample the stations stored in
f
the current memory bank.
f
BANDSCAN: Sample receivable stations in
the current waveband.
f If necessary, first switch to FM radio
operation.
f Press the MENU 5 button to open the
menu.
f Press the MENU 5 button repeatedly
until "KEY PRG" appears in the display.
f Turn the volume control 1 to the left or
right in order to change between the
settings.
f Press the MENU 5 button, repeatedly if
necessary, to close the menu.
Robert Bosch Car Multimedia GmbH

Traffic information

Switching traffic information prior-
ity on/off
To switch the priority for traffic information on
or off in any operating mode,
f Press the TA ; button.
Note:
This function is only available in the
USB and AUX operating modes if the
FM waveband was tuned to last.
The priority for traffic announcements is
activated if the display shows the TA symbol.
As soon as the device receives a traffic
announcement, it is switched through. The
display shows "TRAFFIC" for the duration of
the announcement.
Note:
You will hear a warning beep,
f
if you leave the reception area of
the selected traffic information
station while you are listening to
the traffic radio station or
another audio source, and the
automatic search which then
follows fails to find a new traffic
information station.
if you retune the radio from a
f
traffic information station to a
station that does not broadcast
traffic information.
If you hear the warning beep, you can
either switch off traffic information
7 620 210 017 | 11.2013
en | 43

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

7 620 210 017

Inhaltsverzeichnis