Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance; Specifications - Sharp QT-CD180H Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für QT-CD180H:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Maintenance

Cleaning the lens and tape-handling parts
Do not touch the laser pickup lens. If fingerprints or dust accumulate
on the pickup, clean it gently with a dry cotton swab.
Dirty heads, capstan or pinch roller can cause poor sound and tape
jams. Clean these parts with a cotton swab moistened with commer-
cial head/pinch roller cleaner or isopropyl alcohol.
After long use, the deck's heads and capstan may become magnet-
ised, causing poor sound. Demagnetise these parts once every 30
hours of playing/recording by using a commercial tape head
demagnetiser. Read the demagnetiser's instructions carefully before
use.
A
B
A Laser pickup lens B Pinch roller
D Recording/Playback head E Erase head
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution,
then wipe with a dry cloth.
Caution:
Do not use oil, solvents, petrol, paint thinners or insecticides on the unit.
Condensation
Sudden temperature changes, storage or operation in an extremely hu-
mid environment may cause condensation inside the cabinet (CD pickup,
tape heads, etc.).
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no disc (or cassette) in the unit
until normal playback is possible (about 1 hour).

Specifications

SHARP reserves the right to make design and specification changes for
product improvement without prior notice.
General
Power source
Power consumption
Output power
Speakers
Dimensions
Weight
Compact disc player
C D
E
C Capstan
Type
Signal readout
Audio channels
Filter
D/A converter
Wow and flutter
Radio
Frequency range
Tape recorder
Frequency response
Signal/noise ratio
Wow and flutter
Motor
Bias system
Erase system
AC 230-240 V, 50 Hz
DC 9 V ["D" size (UM/SUM-1, R20 or HP-2) battery x 6]
10 W
MPO: 8.4 W (4.2W + 4.2W)
(AC operation, DIN 45 324)
RMS: 4.6 W (2.3W + 2.3W)
(DC operation, DIN 45 324)
8 cm (3-1/8") full-range speaker x 2
Width: 376 mm (14-6/8")
Height: 150 mm (5-7/8")
Depth: 230 mm (9")
2.5 kg (5.5 lbs.) without batteries
Compact disc
Non-contact, 3-beam semiconductor laser pickup
2
8-time over sampling digital filter
1-bit D/A converter
Unmeasurable (less than 0.001% W. peak)
FM: 87.5 - 108 MHz
AM: 526.5 - 1,606.5 kHz
50 - 14,000 Hz (Normal tape)
50 dB
0.3 % (DIN 45 511)
DC 9 V electric governor
AC bias
Magnet erase
E-7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis