Sony IPELA NSR-1000-Serie Installationsanleitung Seite 29

2
Click [Device] at the top of the Configuration
window.
The Device Configuration screen appears.
3
Click (Camera Auto Registration).
The Multiple Camera Registration dialog box
appears.
The Multiple Camera Registration dialog box
displays a list of the results of the automatic search.
When you want to configure settings such as the
user name and password of the administrator and
the IP addresses for the devices, proceed to Step 4.
When you want register the devices with the
information from the automatic search as is,
proceed to Step 5.
4
Configure each item.
Enter the administrator user name and password.
It is possible to enter the setting values individually,
but the following shows how to enter the same
setting values for multiple devices simultaneously.
1 Select the check boxes of the devices for which
you want to enter setting values, and click the
[Input All] button.
The Input All dialog box appears.
2 Select the check boxes of the items you want to
enter, enter the necessary information, and
click [OK].
User Name
Enter the user name for connecting to the
device. It can be up to 32 characters and consist
of alphanumeric characters and some symbols
(periods (.), hyphens (-), underscores (_)).
Password
Enter the password for connecting to the
device. It can be up to 32 characters and consist
of alphanumeric characters and some symbols
(periods (.), hyphens (-), underscores (_)).
IP Address
Enter the IP address for the device.
When registering multiple devices
simultaneously, IP addresses are configured
sequentially, starting with the entered address.
Port No.
Enter the port number on the device side for
when connecting with the device.
The default setting is "80."
The dialog box closes, and the Multiple
Camera Registration dialog box reappears.
5
Select the check boxes of the devices you want to
register, and click the [Register] button.
29
Step 3: Settings