g
LAN setup
Click on "Ethernet settings" in the "Settings for wireless networks" submenu.
Activate the LAN function (Ethernet). If the "Use static IP" function is deactivated,
the IP address is automatically set if a DHCP server is available.
Activate the "Use static IP" function to set the network parameters manually. To do
this, you must enter the following data: IP address, subnet mask, standard gateway,
DNS server IP address.
Setting up Bluetooth
Click on the "Bluetooth settings" in the "Settings for wireless networks" submenu.
Activate the Bluetooth function.
Click on "make device visible".
Activate the Bluetooth function on the device, which you wish to connect to the TV
Box.
Enter the PIN ("0000" or "1234") to establish the connection.
After successful pairing, the name of the connected device is displayed in the "Blue-
tooth devices" area.
52
00054801man_en.indd 52
Operation
Internet TV Box
07.09.11 09:36