Siemens SIPART DR19 Kurzanleitung Seite 64

Configuring
Config. Setting
switch
S42 Control signal CB
[0] Static, no acknowledgement
1 Static with acknowledgement
2 Dynamic as pulse (flip-flop-effect)
S43 Blocking of internal/external setpoint switchover
[0] Internal only
1 External only
2 No blocking
S44 x-tracking with H or N or Si
[0] No
1 Yes
S45 Setpoint following CB-failure
[0] Last wi
1 Safety setpoint SH1
S46 Tracking of wi or SH1/SH2/SH3/SH4 to actual setpoint w
wi
[0] yes
1 no
2 yes
S47 Direction of action in relation to xd (w-x)
[0] Normal
1 Reversed
S48 Connection of D element
[0] xd
1 x
2 x1
3 z direction of action against x (conn. to manipipulated variable y)
4 z direction of action with x (conn.to manipulated variable y)
S49 Choice of adaptation
[0] No adaptation
1 Control response without overshoot
2 Control response with overshoot based on absolute value optim.
64
Function
SH1 to SH4
no
no
yes if S1 = 1
(Kp>0)
(Kp<0)
Quick Reference
SIPART DR19
C73000-B7474-C140-06