Samsung SCC-B2303 Bedienungsanleitung Seite 12

IRIS
E
This CAMERA has an IRIS function for automatic control of the brightness
level through the intensity of radiation.
❿ ALC
If you select the ALC menu and press the [ENTER] key, the sub-screen
will appear to set the brightness level. Here, you are able to set the
brightness level by pressing the LEFT or RIGHT key in the LEVEL
menu. Level setting is available only by using the DC IRIS lens.
CAMERA ID ON...
IRIS ALC...
BLC OFF
COLOR/BW COLOR...
SHUTTER AUTO X8
MOTION F.FAST
WHITE BAL ATW
SYNC INT
SPECIAL ...
EXIT QUIT
22
(ALC)
press the
[ENTER] key
DC IRIS (00) ----I----
RET
The DC IRIS level setting is available in the SETUP MENU mode as well
as in the operation mode. If you press the LEFT or RIGHT key for about
2 seconds, the DC IRIS Brightness Level setting menu will appear.
Please press the LEFT or RIGHT key to change the mode from EXIT to
SAVE and hit the [ENTER] key to save the file.
DC IRIS
EXIT
❿ ELC
This menu controls the High Speed Shutter Level within a limited range
in the event of too intensive radiation from outside while using the
Manual Lens. If you select the ELC in the IRIS menu and press the
[ENTER] key, the following subscreen will appear. Here, you are able to
set the level by pressing the LEFT or RIGHT key.
CAMERA ID ON...
IRIS ELC...
BLC OFF
COLOR/BW COLOR...
SHUTTER AUTO X8
press the
MOTION F.FAST
[ENTER] key
WHITE BAL ATW
SYNC INT
SPECIAL ...
EXIT QUIT
(00) ----I----
QUIT
(ELC)
LEVEL (00) ----I----
RET
E
23