Endress+Hauser RIA452 Betriebsanleitung Seite 124

Commissioning
Function Parameter
(menu
item)
Ref. integr. Input
Lintab
Pre-counter Off
Count up
Count down
Integr. base Off
sec
Min
hour
day
Dec. factor XXXXX
XXXX.X
XXX.XX
XX.XXX
X.XXXX
Factor 0..99999
1.0
XXXXXXXXX
Dimension
Dec. point T XXXXX
XXXX.X
XXX.XX
XX.XXX
X.XXXX
Set count A 999999
0.0
Set count B 999999
0.0
124
setting
Selects which value should be integrated.
• Input = measured value
• Lintab = linearized measured value or current flow value for
channel calculation
Activation of the preset counter
Off = preset counter off
Count up = counting up from zero to the end value
Count down = counting down from the start value to zero
Time basis for integration
Decimal point position of the conversion factor
Conversion factor
Select the dimension from the list or dimension as free text (max. 9
characters long).
Decimal point of totalizer
End value/start value for preset counter; refers permanently to relay 1.
Value for preliminary alarm; refers permanently to relay 2.
Description
RIA452
Endress+Hauser