Panasonic CZ-RTC2 Bedienungsanleitung Seite 14

4. Weekly Program Function (Continued)
• Duplicating the Program Timer
You can duplicate the preset program by day.
Select the copy source.
1. If is pressed in program checking mode
enters the copy mode (Selecting the copy source
the program timer.
While in the copy mode of the program timer,
and (day) of the copy source fl ash on the display.
2. Press /
source.
Select the copy destination.
3. If is pressed in the mode of selecting the copy source
, it enters the copy mode (Selecting the copy
destination ) of the program timer.
4. Press /
source. Then, press
the program checking mode.
Note
The program will be overwritten if the preprogrammed day is selected as a copy source.
• Before Asking Repair Work
Before asking repair work, please check the followings.
Trouble
"ERROR" is displayed when
the minute digits are entered.
The set data is not stored.
Program does not function.
to select the day of the copy
to select the day of the copy
to complete copying and return to
If there is another TIMER No. which has the program of the same time and same day,
you cannot overlap the setting.
The stored programs are automatically sorted by the time. Check if the data is stored in
the other TIMER No.
Check if the time indication is not "– – : – –".
When the time is invalid, the program is also invalid.
Check the remote controller prohibition inside.
In that case, the program is invalid.
, it
) of
1
Possible Cause/Remedy
EN-10
3,4 2,4