E-TS730EX.book 26 ページ 2005年11月11日 金曜日 午前10時10分
Useful Information
Display messages
One of the following messages will be displayed in the condition described below.
Display message
Phonebook Full
No Entries
Memory Full
Troubleshooting
General use
Problem
The unit does not work.
I cannot hear a dial tone.
Programmable settings
Problem
I cannot programme
items.
While programming, the
unit starts to ring.
26
Cause & solution
L There is no space to store new items in the phonebook.
Erase unnecessary items (page 15).
L Your phonebook, redial list or caller list is empty.
L Conversation recording memory is full. Erase
unnecessary items (page 25).
Cause & solution
L Check the connections (page 7).
L Unplug the unit's AC adaptor or Interface cable to reset
the unit. Reconnect the adaptor or interface cable and
try again.
L Confirm that the telephone line cord is connected
(page 7).
L Disconnect the unit from the telephone line and connect
a known working telephone. If the working telephone
operates properly, contact our service personnel to
have the unit repaired. If the working telephone does
not operate properly, contact your telephone company.
Cause & solution
L Do not pause for over 1 minute while programming.
L A call is being received. Answer the call and start again
from the beginning after a call is finished.