Advanced Operations - AEG vcr 4505 Bedienungsanleitung

HG210ED(EN).fm Page 9 Tuesday, March 2, 2004 4:08 PM
Recording
Viewing and Recording the Same Programme
1) Insert a cassette tape with its erase-prevention tab in place.
(If necessary, rewind or fast forward the tape to the point
at which you want to begin recording.)
2) Press the number buttons
the channel to be recorded.
3) Press SPEED/SYSTEM
to select the tape speed (SP/LP).
4) Press REC/OTR
to begin recording.
•The REC indicator on the VCR comes on.
5) Press STOP
/ when recording is completed.
L
Skipping Unwanted Programme Material During
Recording
1) Press PAUSE/STILL
when you want to temporarily halt
recording.
You can check the remaining pause time with
the TV screen. Each mark represents 1 minute. After 5
C
minutes, the VCR will automatically switch to the Stop
mode to prevent tape damage.
2) Press PAUSE/STILL or REC/OTR

Advanced Operations

Counter Memory
This feature can be used to memorize a beginning point that
you want to watch again. Rewinding or fast forwarding makes
it easy to locate this point.
Note: • If a tape includes both programmes recorded in the
PAL system and ones recorded with NTSC system,
this function may not be operated correctly.
• TAPE COUNTER MEMORY does not function if
the Auto Repeat mode is set to ON. In this case, set
the Auto Repeat mode to OFF.
1) Stop the tape at the desired point.
2) Press TAPE COUNTER RESET
3) Press TAPE COUNTER MEMORY
the TV screen.
4) Press REC/OTR or PLAY /
o
•Press STOP / when recording or playback is completed.
L
5) Press REW / or F.FWD /
s B
stop when the counter returns to 0:00:00 (approx.).
To Exit the Counter Memory
TAPE COUNTER MEMORY
Press
from the TV screen.
Note:
When you set the Auto Repeat mode to ON while the
Counter Memory mode is ON, the VCR exits the
Counter Memory mode automatically.
OTR (One Touch Recording)
This function enables you to set the duration of a recording
REC/OTR
simply by pressing .
1) Follow steps 1) 3)
to in "Viewing and Recording the Same
Programme" section.
2) Press REC/OTR
repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
I [0:30]
I I[1:00]...
(Normal (OTR:
recording) 30 minutes)
Recording stops when 0:00 is reached.
CHANNEL
or ( / ) to select
o p
marks on
C
to resume recording.
to display 0:00:00.
so that "M" appears on
.
. The VCR will automatically
so that the "M" disappears
I[7:30] I[8:00]
Recording One Programme While Viewing Another
You can record one programme while viewing another. To
start recording, follow steps 1)
Recording the Same Programme". Then, set the TV to the
channel you want to watch.
To Monitor the Progress of Your Recording
Select the video channel on the TV.
Assemble Function
• You can record in continuation from previous programme
on a pre-recorded tape.
1) Insert a pre-recorded tape. Press
playback.
2) Press PAUSE/STILL
at the desired point on the tape.
3) Press REC/OTR
. The VCR will be in the Recording Pause
mode.
4) Press CHANNEL
( / ) to select the channel to be
o p
recorded.
5) Press REC/OTR PAUSE/STILL
or
begin.
6) Press STOP
/ when recording is completed.
L
• To check time remaining during an OTR
Press DISPLAY .
• To change the recording length during an OTR
Press REC/OTR repeatedly until the desired length appears.
• To stop an OTR before recording is finished
Press STOP / .
L
• To cancel the OTR but continue recording
Press REC/OTR repeatedly until "I" appears without the
recording length.
Auto Repeat Playback
The VCR has an auto repeat function that allows you to repeat
a tape indefinitely without touching
• Use the remote control for this procedure.
• Insert a pre-recorded tape.
1) Press MENU .
2) Press PLAY / or STOP /
o L
F.FWD
/ .
B
3) Press PLAY STOP
/ or /
o L
4) Press F.FWD
/ so that "ON" appears next to "AUTO
B
REPEAT" on the TV screen.
When in Stop mode, Auto Repeat mode will start
automatically.
If the on-screen menu still remains, press
PLAY
then press / .
o
Note: •
Once you select the Auto Repeat mode, it stays in
effect even after you turn off the VCR.
•
TAPE COUNTER MEMORY does not function if
the Auto Repeat mode is set to ON.
•
When you set the Auto Repeat mode to ON while the
Counter Memory mode is ON, the VCR exit the
Counter Memory mode automatically.
To Stop Playback
Press STOP / .
L
To Exit the Auto Repeat Mode
1) 3)
Repeat steps to . Then, press
9
to 4) under "Viewing and
PLAY / to start
o
. The recording will
PLAY / .
o
to select "SET UP", then press
to select "AUTO REPEAT".
MENU
to exit,
F.FWD
/ .
B
EN