Silvercrest SEKU 2000 A1 Bedienungsanleitung Seite 15

Installing the appliance in the fi re surround
GB
To fi nalise, install the appliance in the assembled fi re surround.
Place the appliance carefully on the base plate (from the rear of the fi re surround) and then push it
♦
gently forward as far as it will go into the opening of the fi re surround.
Secure the appliance to the fi re surround at the edges with the fi xing devices
♦
6 x 25 mm
Insert the plug into the mains power socket.
♦
WARNING
Improper laying of the power cable can cause damage to people and property!
Pay heed to the following safety information to avoid these risks:
Do not bend or clamp the power cable and do not lay it tautly.
►
Do not run the power cable over sharp edges.
►
14
.
A
F
A
Assembly
and the screws
F
SEKU 2000 A1