Smatv Scanning; Reset To Factory Defaults; Channel Organising; Delete Satellite - Samsung DSR 9400T Gebrauchsanweisung

OPERATING THE RECEIVER

1.6 SMATV Scanning

In case that several generations use Antenna and LNB
in common, search the service the from 950 to 2150MHz.
Select Searching Type "Automatic" or "Manual".
Select Scan Mode "All" or "Only Free".
You can input alternative symbol rate from 1 to 4
N N o o t t e e : 1. When your searching type is set to Automatic
during SMATV scanning, you have only to enter
the alternative symbol rate(1~4) you want.
2. When your searching type is set to Manual
during SMATV scanning, you must enter both
frequency and symbol rate.
When you select "Automatic", STB will search all available
channels based on symbol rates over whole frequencies.
On the other hand, it will scan channels with exact
information for symbol rate and frequency on "Manual".

1.7 Reset to Factory Defaults

This is to recover the Factory set values in case the user
has encountered some problems after changing any
values of channel data and others which may be in error.
The screen display will be as follows:
At the request window,
if you press key, the receiver will be reset to factory
default settings automatically.
N N o o t t e e : This cause your previous settings to be deleted!
GB-20
D I G I T A L S

2. Channel Organising

The "Channel Organising" menu has seven functions:
This menu is for removing some channels from channel
list which are related wth designated Satellite or
Transponder. And it provides making favorite list and
moving channel position as you want.
Enter the PIN Code.
If you have not entered your own PIN Code 0000 applies,
which was set at the factory.

2.1 Delete Satellite

Select the desired satellite list you want to delete
by pressing RED (
Press key for confirmation.
N N o o t t e e : This feature doesn't delete satellite itself but
deletes the lis of channels registered at the
selected Satellite.

2.2 Delete Transponder

Select the desired transponder list you want to
delete by pressing RED (
Press key for confirmation.
N N o o t t e e : This feature doesn't delete transponder itself
but deletes the list of channels registered at the
selected transponder.

2.3 Delete Channel

Select the desired channel you want to delete by
pressing RED (
Press key for confirmation.
A T E L L I T E R E C E I V
OPERATING THE RECEIVER
) key.
) key.
) key.
GB-21
E R