Positioning And Setup; Tabletop Use; Wall Mounting - Medion LIFE P64026 Bedienungsanleitung

Positioning and setup

Tabletop use

Wall mounting

16
The components have rubber feet so that the system
can be used as a tabletop device.
To set up the speakers, fold down the bases on the
back.
You can attach the main device and both speakers to a
wall. To do so, you must attach two screws to the wall.
The heads of the screws must fit into the keyhole
notches on the back of the three device parts.
WARNING!
Before drilling the holes for assembly, make sure that
there are no power or supply cables or pipes in the wall.
Note the lengths of the speaker cables before
mounting the speakers!
Mark the holes to be drilled.
Distance between the drill holes for speakers: 80mm;
Distance between the drill holes for main device: 146
mm
Drill 6 holes for 6 mm wall plugs using these
markings.
Insert 6 mm plastic wall plugs into the drilled holes.
Insert the screws into the wall plugs and tighten
them with a screw driver.
Hang the main device and the speakers using the
keyhole notches provided.