Inserting The Batteries In The Remote Control; Insert Batteries In The Unit; Aerial Connection - Medion MD 81834 Handbuch

Start of operation
Inserting the batteries in the remote
control
Insert 2 Mignon AAA 1.5 V LR 03 batteries (not supplied) in
the remote control.
Open the battery compartment by pushing the lid
catch in the direction of the arrow.
Insert the batteries so that the negative end is placed
next to the springs.
Close the battery compartment.

Insert batteries in the unit

Insert 3 Mignon AAA 1.5 V LR 03 batteries (not supplied) in
the unit. The batteries are used to store data in case of a
power cut.
Open the battery compartment by pushing the lid
catch in the direction of the arrow.
Insert the batteries so that the negative end is placed
next to the springs.
Close the battery compartment.

Aerial connection

The aerial socket input (
the appliance. Here you can connect the player to
the aerial socket using a 75 Ohm aerial cable (not
provided).
The player has a wire aerial for VHF which needs to be
adjusted for optimum reception.
The player has a built-in directional ferrite antenna
for MW reception. You may therefore need to turn
the player to improve reception.
14
FM ANT
) is on the left side of