Sony RDS EON STR-DE305 Bedienungsanleitung Seite 27

Selecting the speaker system
To drive the speakers, select the speaker system as
follows:
To drive Depress SPEAKERS button
Speaker system A (connected A
to the SPEAKERS A
terminals) =
Speaker system B (connected B
to the SPEAKERS B
terminals)
Both speaker systems Aand A+B
B (series connection)
Note
No sound is heard when you press SPEAKERS A+B without
connecting speaker system B.
Where do I go next?
Go on to the next section to connect the mains lead.
aa Sere Ee ee ee
AC Hookups
Connecting the mains lead
Connect the mains lead from this receiver and from
your audio/video components to a wall outlet.
If you connect other audio components tg the |
SWITCHED AC OUTLET on the receiver (STR-DE305
only), the receiver can supply power to the connected
components so you can turn on/off the whole system
when you turn on/off the receiver.
SWITCHED AC OUTLET
to a wail outlet
Caution
Make sure that the power consumption of the component
connected to the receiver's AC outlet does not exceed 100
watts. Do not connect high-wattage electrical home
appliances such as electric irons, fans, or TVs to this outlet.
Where do I go next?
Before you use the receiver, go to the next section to make
sure that all the controls are set to the appropriate positions.
ae rae a RL
Before You Use Your Receiver
Before you start using your receiver, make sure that
you have:
¢ Turned VOLUME to the leftmost position (0).
* Selected the appropriate speaker system. (See
"Selecting the speaker system" on this page.)
* Sét BALANCE to the centre position. =
Turn on the receiver and check the following display.
e Press MUTING on the remote if the MUTING is
displayed. ;
Sn es
Storing FM Stations
Automatically in Alphabetical
Order ("Auto-betical")
With "Auto-betical select" you can automatically store
up to 30 FM and FM RDS stations in alphabetical order
without redundancy. Additionally, "Auto-betical.
select" only stores the stations with the clearest signals.
If you want to store FM or AM (MW ) stations one by
one, see "Presetting Radio Stations" on page 10.
FM RDS stations are stored first, in alphabetical order
by their Station Name, followed by regular FM stations
in order of frequency. (For more details on RDS, see
pageTT) 00
1 Press POWER to turn off the receiver.
2 Hold down MEMORY and press POWER to turn
the receiver on.
"" AUTOBETICAL SELECT" appears and the
receiver scans and stores all the FM and FM RDS
stations in the broadcast area.
"FINISH" appears when the receiver has finished
storing the FM and FM RDS stations.
To stop Auto-betical before storing all the stations
Press POWER to turn the receiver off.
Notes
* Stations currently stored in the preset memory are shifted
to the rear (toward C0) and may be erased, depending on
the number of stations received by Auto-betical select.
¢ If you move the aerial after storing stations using Auto-
betical select, the stored settings may no longer be valid. If
this happens, store the stations again.
* If you move to another area, repeat this procedure to store
stations in your new area.
7