Service Follow Function - Pioneer GEX-P700DAB Bedienungsanleitung

Using the DAB Functions with AVM-P9000R

Service Follow Function

If reception of the selected Service worsens, this automatically searches for other
Ensemble supporting the same Service. Depending on conditions, an Ensemble supporting
Alarm and Road Traffic Flash is received.
1. Select "SF" by moving the joystick.
"SF" is highlighted in green.
2. Click the joystick.
Each click toggles "SF" On/Off in an DAB tuner.
Service Follow Function (FM)
When an Ensemble that supports the same Service can't be found, or when reception
conditions are poor, the Service Follow Function switches to an identical FM broadcast.
However, switching is not possible if reception of a station broadcasting an identical FM
transmission is poor, doesn't exist or is not cross-referenced by the DAB station.
During FM reception, if DAB finds a Service identical to the original Service, and
reception is better, DAB reception resumes. Selection is then performed in line with the
Service Component selected with the first Service.
Note:
• Switch the Service Follow Function ON, and the Service Follow Function (FM) is automatically
switched ON.
• The Service Follow Function (FM) is a DAB function. If the initial source you listen to is RDS
(FM), there's no switching to DAB.
• Even if you switch to an FM broadcast, the button only functions during DAB operation.
7 When the "Net" indicator flashes
When the selected Service does not have broadcast station information for an identical FM
broadcast, if reception conditions for that Service worsen, the "Net" indicator flashes to
indicate the Service Follow Function (FM) cannot operate.
Note:
• Refer to page 29 "About the Indications" for confirmation concerning "Net" indicator flashing.
37