Werbung
A. Card installation
1.
Power off your computer and unplug the power cables.
2.
Remove the chassis cover and locate the AGP or PCI Express
slot.
3.
Remove the expansion slot cover of the appropriate slot for
your graphics card.
4.
Insert the card into the slot until it is firmly in place.
5.
Secure the card into the slot with a screw.
6.
Replace the chassis cover and connect the monitor cable.
7.
Reconnect all power cables.
Note
If your graphics card has an auxiliary
power connector, connect the
appropriate power plug from the system
power supply to the graphics card's
auxiliary power connector.
Werbung
