JVC 1016MTH-VT-VT Bedienungsanleitung Seite 11

While the search continues a message may appear,
asking whether you want to sort channels according
to the LCN(*). Select Yes and press OK
(*)
Note:
Using SatcoDX Feature (**)
You can perform SatcoDX operations using the
Installation>Satelite Settings menu. In the SatcoDX
menu, there are two options regarding to the SatcoDx.
You can download or upload SatcoDX data. In order
to perform these functions a USB device must be
connected to the TV.
You can upload current services and related satellites
& transponders in TV, to a USB device.
Additionally you can download one of the SatcoDx
related satellites and transponders in the selected
terrestrial, cable and/or analog services, they will be
kept and only satellite services will be removed.
Afterwards, check your antenna settings and make
changes if necessary. An error message stating "No
Signal" may be displayed if the antenna settings are
(**) If this feature is supported by your TV
E-Manual (if available)
the E-Manual.
To use E-Manual, press to the Info button while main
menu is displayed on the screen or press Quick Menu
button, select Information Booklet and press OK.
By using the directional buttons select a desired
category. Every category includes different topics.
Select a topic and press OK to read instructions.
To close the E-Manual screen press the Exit or Menu
button.
Note: The contents of the E-Manual may vary according to
For further information and more detailed instructions,
refer to the complete user manual on our website
Connectivity
.
To Connect to a Wired Network
You must have a modem/router connected to an
active broadband connection.
Ensure that Nero Media Home software is installed
to your PC (for Audio Video Sharing function). See
"Nero Media Home Installation" section.
Connect your PC to your modem/router. This can
be a wired or wireless connection.
Connect your TV to your modem/router via an
ethernet cable. There is a LAN port at the rear
(back) of your TV.
LAN input on the rear
side of the TV
Media Browser. Press the Menu button and select
Media Browser. Press OK to continue. Select the
use the Media Browser screen to access and play
PC/HDD/Media Player or any other devices that are
compatible should be used with a wired connection
for higher playback quality.
To configure wired settings please refer to
the Network/Internet Settings section in the
System>Settings Menu.
You might be able to connect your TV to your LAN
a case, use an ethernet cable to connect your TV
directly to the network wall outlet.
English - 10 -
Broadband ISP connection
LAN (ethernet) cable
OK. You must always