Blaupunkt New York 835 W Bedienungsanleitung Seite 28

Radio mode
Radio mode
Start radio mode
u In the main menu, press the Radio button.
The radio menu is displayed.
Select memory bank
Diff erent memory banks and wavebands are available.
Up to 6 stations can be stored in each memory bank.
u Press the [
] button repeatedly until the desired
memory bank is displayed.
Tuning into a station
Tuning into stations manually
u Briefl y press the [
eral times to change the frequency in increments.
Enter broadcast frequency directly
If the frequency of the desired stations is known, it can
be entered directly via the touchscreen.
u In radio mode, press the [
A numeric keypad is displayed for the frequency
input.
u Enter the frequency of the desired station with the
numeric keypad.
u Press the [
] button.
The radio menu is displayed, the station of the
frequency entered is played back.
Starting station seek tuning
u Press the [
] or [
to start station seek tuning.
The radio tunes into the next receivable station.
Note:
For the reception area Europe: In the FM waveband,
only traffi c information stations are tuned into if the
priority for traffi c information is switched on.
28
] or [ ] button once or sev-
] button.
] button for approx. 2 seconds
Storing stations manually
u Select the desired memory bank with the [
ton.
u Set the desired station.
u Press the [
] button.
The menu for storing stations is displayed. 6 memory
locations are available that are displayed as buttons.
u Press the button under which you want to store the
current station.
The station is stored, the radio menu is displayed
again.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for and
store the 6 FM stations off ering the strongest reception
in the region in the memory bank FM1, FM2 or FM3.
u Select an FM memory bank.
u In the radio menu, press the [
u In the options menu, press the Travelstore button.
The tuner starts the automatic station seek tuning.
After the storing is completed, the radio plays the
station at memory location 1 of the previously se-
lected memory bank.
Note:
For the reception area Europe: With switched-on pri-
ority for traffi c information, only traffi c information
stations are stored.
Scanning stations
You can use the scan function to play all the receivable
stations of the current waveband for a few seconds.
u In radio mode, press the [
The seek tuning searches for stations in the current
waveband. Each receivable station is played for a few
seconds in the process.
u Pressing the [
] button again selects the currently
scanned station and plays it back.
Switching RDS on/off
Many FM stations broadcast an RDS (Radio Data System)
signal in addition to their programme in the reception
area Europe that allows additional functions, such as the
display of the station name.
u In the radio menu, press the [
] but-
] button.
] button.
] button.