LG CRD-8520B Bedienungshandbuch Seite 8

A) When using a Primary IDE port
If you need to connect your CD-ROM drive to the same Primary IDE port, the
CD-ROM drive should be set to Slave position.
Master drive
(Booting hard disk)
(CD-ROM drive)
B) When using a Secondary IDE port
You can also connect CD-ROM drive to the Secondary IDE port and set to
Master position.
Master drive iS Master drive
(Booting hard disk) ——— ™e—_ (CD-ROM drive]
Ee _ Slave drive
(Other IDE drive)
Motherboard
Secondary connector
5. When the installation of the drive unit is complete, replace the computer
cover.
6. Reconnect the computer power cord and turn on the computer.
E-8