Werbung
Verfügbare Sprachen
Verfügbare Sprachen
I. Introduction
We want to say thank you for choosing the
Speedshot Converter and congratulation you
on your decision. We are sure that our product
will provide you with a great deal of gaming
pleasure for years to come. These instructions
contain valuable information about operating
and configuring the converter. Please keep this
manual in a safe place for future reference.
Il. Quick start
1. Connect your mouse and keyboard to the
USB port on the converter. Recommended
hardware:
Keyboard
e with USB connection
e wired
e without macro- or hub function
e without mouse function
Mouse
e with USB connection
e wired
e very high dpi resolution
2. Connect the converter to an available USB
port on your console and turn the console on.
3. Pay attention to the Player LEDs (1-4).
The converter will connect to next available
channel on the Xbox 360. If you want to play
as Player 1, switch the other controllers off
and repeat the procedure so that the Player 1
LED lights up.
00051799man_BUCH.indb
10
To connect the PS3 version, push the Home
button in the middle of the adapter similar to
how you would on the controllers. If the PS3
adapter doesn't connect to channel 1, you can
reassign the converter under Accessory Settings
in the PS3 menu..
3. The LEDs "M" (for mouse) and "K" (for
keyboard) on the converter let you see if the
mouse and keyboard have been correctly
recognised. If the LEDs are not lit up as in
the image below, try connecting the converter
again or try, if possible, to connect a different
keyboard or mouse. If you have problems,
you can either consult Section VI of the ope-
rating instructions or contact our Customer
Support team (contact details in Section VII).
I IMPORTANT !!!
4. Always set your mouse to the highest dpi
resolution possible.
15.12.11
13:52
Werbung
