Toro Power Shovel 60V Bedienungsanleitung Seite 12

Operation
Starting the Machine
1. Ensure that the vents on the back of the machine
are clear of any snow or ice
1. Air vents
2. Open the battery lid
3. Align the cavity in the battery pack with the
tongue in the battery compartment
4. Push the battery pack into the battery
compartment until the battery locks into the latch
(Figure 7).
1. Battery lid
5. To start the machine, push the trigger lock, then
squeeze the run trigger
Note:
Slide the 2-speed switch to change the
speed of the rotor.
(Figure 6).
Figure 6
(Figure 7).
(Figure
Figure 7
(Figure 8).
1. 2-speed switch
2. Trigger lock
6. Close the battery lid.
Shutting Off the Machine
To shut off the machine, release the run trigger.
Whenever you are not using the machine or are
g316735
transporting the machine to or from the work area,
remove the battery pack; refer to
Battery Pack (page
7).
g427205
10
Figure 8
3. Run trigger
Removing the
11).
g427203